GE JKP35WM dimensions JKP35BM/WM, GE 27 Built-In Double Wall Oven, 4 or, Runners

JKP35BM/WM

GE® 27" Built-In Double Wall Oven

Dimensions and Installation Information (in inches)

Locate junction box

KW Rating

240V	6.8
208V	5.1
Breaker Size
240V	30 Amps
208V	30 Amps

Note: Cabinets installed adjacent to wall ovens must have an adhesion spec of at least a 194°F temperature rating. For 27” built-in single ovens, if marks, blemishes or the cutout opening is visible above the installed oven, it may be necessary to add wood shims under the runners and front trim until the marks or openings

are covered.

Note: Door handle protrudes 3" from door face. Cabinets and drawers on adjacent 45° and 90° walls should be placed to avoid interference with the handle.

Electric wall ovens are not approved for installation with a plug and receptacle. They must be hard wired in accordance with installation instructions.

Installation Information: Before installing, consult

installation instructions packed with product for

current­ dimensional data.

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

C	2" x 4" or
L	equivalent
	runners

Suitable
bracing
to support		18"
runners		Over centerline
			of cabinet
	(must support 300 lbs.)
Cabinet				27"
A – Cabinet width required				27" min.
B – Minimum cabinet depth				23-5/8"
C – Opening width				25" min. - 25-1/4" max
D – Opening height				50-1/8" max
E – Recommended minimum cutout location from floor				13-1/4"
Oven
F – Overall depth*				23-5/8"
G – Overall height with trim				51-7/8" - 52-3/4"
Overall height without trim				51"
H – Overall width				26-5/8"

*Depth including door handle is approximately 26-7/10" min. to 26-8/10" max.

Locate		10
junction box
for 27"models
either 5" MIN.
below cutout
floor or 44"
MIN. above
cutout floor
Access
from
adjacent	D
cabinet

required

E
	2" X 4" or
Minimum	equiv. runners
	(cutout floor)
cutout location
from floor

for 24"models 56" MIN. above cutout floor

Allow 3/4"

A for overlap over all edges of cutout

C

B

G

Conduit

(48-1/2" Long)

F

21" MIN. door opening allowance

21

All GE ranges are equipped with an Anti-Tip device. The installation of this device is an important, required step in the installation of the range.

Listed by Underwriters Laboratories

Specification Created 1/07 320372