Camera Setup, Auto Login Setup, Info, General setting

8. Camera Setup

Touch the <Setup> icon to configure a camera to be monitored.

1. Touch <General setting>.
2. Configure the basic camera
settings.
•• Camera Name : Camera name
	is used to easily identify the
	camera when you have more
	than one. i.e., Living room,
	Kitchen, Bedroom.
••	Event Alarm : Specify whether
	to trigger the alarm or not, and
	specify the sensitivity.
	The higher the sensitivity is, the
	subtler motion/audio events will be detected.
••	Night Vision : Set the IR lighting.

3.Configure the notification.

•• Push Notification : Notifies alarm events.

•• YouTube : Creates 30 seconds long footage and uploads onto the user’s YouTube account.

•• Picasa : Sends event images to the user’s Picasa account.

4.Touch <Apply>.

1.Touch the <Network setting>.

2.Configure the wireless network.

•• Wi-Fi : Shows the list of available access points.

-- : Connecting to the AP requires password.

-- : Connecting to the AP requires no password.

•• Other WiFi Networks : Enter the SSID name and password to connect to the network.

If selected, it shows guide on SSID and networking procedures.

1.Touch <Time setting>.

2.Set the camera’s clock.

•• Time Zone : Select your region.

•• Summer Time : Check this option if you live in a country or region where DST(Daylight Saving Time) is applied.

1.Move to the <Setup> item.

2.Enable <Auto Login> to login automatically from the next application running.

Enable <Night Vision> for the camera to switch

automatically to night vision mode.

•• Audio : Adjust the volume of the built-in microphone and

speaker of the camera as appropriate.

1.Move to the <Info.> item.

2.Shows the information on Samsung Techwin Smartcam Application.

vX.XX

XXXX.X.XX.