GE JRS06BJ installation instructions GE 24 Built-In Single Oven, Specification Revised 7/05

JRS06BJ

GE® 24" Built-In Single Oven

Dimensions and Installation Information (in inches)

KW Rating

240V	3.4
208V	2.6

Breaker Size

20 Amps†

†Check local codes for required breaker size.

Note: Cabinets installed adjacent to wall ovens must have an adhesion spec of at least 194° temperature rating. This model is NOT approved for stackable or side-by-side installation.

Installation information: Before installing, consult

installation instructions packed with product for current dimensional data.

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

10

Locate junction box either 5" MIN. below cutout floor or 44" MIN. above cutout floor

27-5/8

Minimum
cutout location	32-1/2
from floor

2" x 4" or equiv. runners

C

L

Suitable
bracing	11"
to support
runners	over centerline
	of cabinet

24	Allow 3/4"
	for overlap
	over all edges
	of cutout
	23-1/2 Min.
	23-3/4
	28-1/4
	25-1/8
22-1/2 Min.
Conduit 49" long

2 x 4 or equivalent runners

All GE ranges are equipped with
an Anti-Tip device. The installation
of this device is an important,
required step in the installation
of the range.	R

20

Listed by Underwriters Laboratories

Specification Revised 7/05 320300