Care and cleaning of the range.

Oven Light Replacement

CAUTION: Before replacing your oven light bulb, disconnect the electrical power to the range at the main fuse or circuit breaker panel.

Be sure to let the light cover and bulb cool completely.

To remove the cover:

Twist lens counterclockwise about a quarter turn to remove.

Do not remove any screws to remove the cover.

Replace bulb with a 40-watt appliance bulb or two-prong halogen bulb, as appropriate.

To replace the cover:

Line up tabs of lens in front of tabs on housing and rotate clockwise to engage.

Tips Care and Cleaning Operating Instructions Safety Instructions

After broiling, remove the broiler pan from the oven.

Broiler Pan and Grid

Do not clean the broiler pan or grid in a self- cleaning oven.

After broiling, remove the broiler pan from the oven. Remove the grid from the pan. Carefully pour out the grease from the pan into a proper container.

Wash and rinse the broiler pan and grid in hot water with a soap-filled or plastic scouring pad.

If food has burned on, sprinkle the grid with detergent while hot and cover with wet paper towels or a dishcloth. Soaking the pan will remove burned-on foods.

Both the broiler pan and grid may be cleaned with a commercial oven cleaner.

Both the broiler pan and grid can also be cleaned in a dishwasher.

Do not store a soiled broiler pan and grid anywhere in the range.

Storage Drawer Removal

To remove the drawer:

To replace the drawer:

Consumer Support Troubleshooting

 

 

 

 

 

 

Rail

Stop guide

 

 

 

Pull the drawer out until it stops.

Lift the front of the drawer until the stops clear the guides.

Remove the drawer.

Place the drawer rails on the guides.

Push the drawer back until it stops.

Lift the front of the drawer and push back until the stops clear the guides.

Lower the front of the drawer and push back until it closes.

20

Page 20
Image 20
GE JSP39 owner manual Consumer Support Troubleshooting, Oven Light Replacement, Broiler Pan and Grid, To remove the cover