Operating Instructions Safety Instructions

Using the oven controls.

Throughout this manual, features and appearance may vary from your model.

CONTROL LOCK/UNLOCK

PRESS + AND – AND HOLD FOR 3 SECONDS

Oven Control, Clock and Timer Features and Settings

Consumer Support Troubleshooting Tips Care and Cleaning

BAKE/TEMP RECALL Pad

Touch this pad to select the bake function.

BAKE Light

Flashes while in edit mode—you can change the oven temperature at this point. Glows when the oven is in bake mode.

START/ON Pad

Must be touched to start any cooking or cleaning function.

Display

Shows the time of day, oven temperature, whether the oven is in the bake, broil or self-cleaning mode and the times set for the timer or automatic oven operations. The display will show “PrE” while preheating. When the oven reaches

the selected temperature, the oven control will beep and the display will show the oven temperature.

 

If “F– and a number or letter” flash in the display and the

 

oven control signals, this indicates a function error code.

 

If your oven was set for a timed oven operation and

 

a power outage occurred, the clock and all programmed

 

functions must be reset.

 

The time of day will flash in the display when there has

 

been a power outage. Reset the clock.

 

If the function error code appears during the self-cleaning

 

cycle, check the oven door latch. The latch handle may have

 

been moved, even if only slightly, from the latched position.

 

Make sure the latch is moved to the right as far as it will go.

 

Touch the CLEAR/OFF pad. Allow the oven to cool for

 

one hour. Put the oven back into operation. If the function

6

error code repeats, disconnect the power to the range and

call for service.

KITCHEN TIMER ON/OFF Pad

Touch this pad to select the timer feature. Then press + and pads to adjust time.

TIMER Light

Flashes while in edit mode—you can change the set time at this point. Glows when the timer has been activated. Flashes again when the time has run out until the control is reset.

CLOCK Pad

To set the clock, touch this pad twice and then touch the + and pads. The time of day will flash in the display when the oven is first turned on.

DELAY START Pad

Use along with the COOKING TIME or SELF CLEAN pads to set the oven to start and stop automatically at a time you set.

DELAY START Time Light

Flashes while in edit mode—you can change the delay start set time at this point. Glows when the function has been activated.

COOKING TIME Pad

Touch this pad and then touch the + or pads to set the amount of time you want your food to cook. The oven will shut off when the cooking time has run out.

COOKING TIME Light

Flashes while in edit mode—you can change the set time at this point. Glows when the function has been activated. Flashes again when the time has run out until the control is reset.

Page 6
Image 6
GE JSP39 Using the oven controls, Functions must be reset, Been a power outage. Reset the clock, Call for service