Using the probe. (on some models) | www.GEAppliances.com |
For many foods, especially roasts and poultry, internal food temperature is the best test for doneness. The temperature probe takes the guesswork out of roasting by cooking foods to the exact doneness you want.
Safety
The temperature probe has a
Use of probes other than the one provided with this product may result in damage to the probe or oven control.
Use the handles of the probe and plug when inserting and removing them from the food and outlet.
■To avoid damaging your probe, do not use tongs to pull on the cable when removing it.
■To avoid breaking the probe, make sure food is completely defrosted before inserting.
■To prevent possible burns, do not unplug the probe from the outlet until the oven has cooled.
Cable
Plug
Probe
Handles
■Never leave your probe inside the oven during a
■Do not store the probe in the oven.
Instructions Operating Instructions
After preparing the meat and placing it on a trivet or on the broiler pan grid, follow these directions for proper probe placement.
Insert the probe completely into the meat. It should not touch bone, fat or gristle.
For roasts with no bone, insert the probe into the meatiest part of the roast. For
Insert the probe into the center of dishes such as meat loaf or casseroles.
Insert the probe into the meatiest part of the inner thigh from below and parallel to the leg of a whole turkey.
Care and Cleaning
How to Set the Oven For Roasting When Using the Probe (on some models)
Insert the probe into the food.
Plug the probe into the outlet in the oven. Make sure it’s pushed all the way in. Close the oven door. Make sure the probe cable is not touching the broil element.
Touch the PROBE pad.
Touch the number pads to set the desired internal food or meat temperature. The maximum internal temperature for the food that you can set is 200ºF.
Touch the BAKE pad.
Touch the number pads to set the desired oven temperature.
Touch the START pad.
The display will flash if the probe is inserted into the outlet and you have not set a probe temperature and touched the START pad.
After the internal temperature of the food reaches 100°F, the changing internal temperature will be shown in the display.
When the internal temperature of the food reaches the number you have set, the probe and the oven turn off and the oven control signals. To stop the signal, touch the CLEAR/OFF pad. Use hot pads to remove the probe from the food. Do not use tongs to pull on
To change the oven temperature during the Roast cycle, touch the BAKE pad and then the number pads to set the new temperature.
■ If the probe is removed from the food before the final temperature is reached, a tone will sound and the display will flash until the probe is removed from the oven.
■ You can use the timer even though you cannot use timed oven operations while using the probe.
15
