GE JTP70CM dimensions JTP70BM/CM/WM, GE 30 Built-InSingle Convection Wall Oven, Suitable, bracing

JTP70BM/CM/WM

GE® 30" Built-In Single Convection Wall Oven

Dimensions and Installation Information (in inches)

Cutout width

KW Rating
240V	4.5
208V	3.4
Breaker Size
240V	20 Amps
208V	20 Amps

Most 30" Wall Cabinets can be used with this unit.
Note: These ovens are not approved for stackable	Suitable
installations.
	bracing
Note: Cabinets installed adjacent to wall ovens
	to support
must have an adhesion spec of at least a 194°F
	runners
temperature rating.
Door handle protrudes 3" from door face. Cabinets
and drawers on adjacent 45° and 90° walls should be
placed to avoid interference with the handle.
Installation Information: Before installing, consult

C

L

21-5/8"

over centerline of cabinet

(must support 275 lbs.)

2 x 4 or equivalent runners

29-3/4

C

21

Allow minimum of 21'' for clearance

to adjacent corners, drawers, walls, or etc.

28-1/2'' MIN.
28-5/8'' MAX.	5
	23-1/2'' MIN.
	Cutout depth	Junction
		box
		location
A
	B
Conduit	27-1/4'' MIN.	22'' MIN.
	27-5/16'' MAX.
(72"
long)	Cutout height

Recommended cutout location 32-1/2"

from floor

30

installation instructions packed with product for

current dimensional data.

Electric wall ovens are not approved for installation

with a plug and receptacle. They must be hard

wired in accordance with installation instructions.

Side-by-side installations require at least 2"

between cutouts.

A=Allow 1" overlap of oven over top and bottom edges of cutout. B=Allow 11/16"-3/4" for overlap of oven over side edges of cutout. C=28-1/4" without trim and 28-3/4" with trim.

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

Listed by

Underwriters

Laboratories

Specification Revised 10/07 320224