GE JTP70SP dimensions GE 30 Built-In Single Convection Wall Oven, 2 x 4 or equivalent runners

JTP70SP

GE® 30" Built-In Single Convection Wall Oven

Dimensions and Installation Information (in inches)

KW Rating
240V	4.5
208V	3.4
Breaker Size
240V	20 Amps
208V	20 Amps

C

L

2 x 4 or equivalent runners

Cutout width
28-1/2'' MIN.
28-5/8'' MAX.	5
	23-1/2'' MIN.
29-3/4	Cutout depth
A
	B

Junction box location

Most 30" Wall Cabinets can be used with this unit.
Note: These ovens are not approved for stackable	Suitable
installations.
	bracing
Note: Cabinets installed adjacent to wall ovens
	to support
must have an adhesion spec of at least a 194°F
	runners
temperature rating.
Door handle protrudes 3" from door face. Cabinets
and drawers on adjacent 45° and 90° walls should be
placed to avoid interference with the handle.
Installation Information: Before installing, consult

21-5/8"

over centerline of cabinet

(must support 275 lbs.)

C

21

Allow minimum of 21'' for clearance

to adjacent corners, drawers, walls, or etc.

Conduit	27-1/4'' MIN.
	27-5/16'' MAX.
48-1/2"
	Cutout height

Recommended cutout location 32-1/2"

from floor

30

22'' MIN.

installation instructions packed with product for

current dimensional data.

Electric wall ovens are not approved for installation

with a plug and receptacle. They must be hard

wired in accordance with installation instructions.

Side-by-side installations require at least 2"

between cutouts.

A=Allow 1" overlap of oven over top and bottom edges of cutout. B=Allow 11/16"– 3/4" for overlap of oven over side edges of cutout. C=28-1/4" without trim and 28-3/4" with trim.

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

Listed by

Underwriters

Laboratories

Specification Created 5/09 320227