6
If you have questions, call 800.GE.CARES or visit our Website at: ge.com

REMOVE PACKAGING

Open the carton and remove parts package.
Check contents to be sure all pieces are
present. (The parts package may be attached
to the power cord.)
Remove the shipping materials. Remove the
carton and set aside. The carton can be used
as a pad when changing or adjusting vent
direction.
Installation Downdraft VentInstructions System

BEFORE YOU BEGIN

Read these instructions completely and
carefully.
•IMPORTANT —Save these
instructions for local inspector’s use.
•IMPORTANT —Observe all
governing codes and ordinances.
•Note to Installer – Be sure to leave these
instructions with the Consumer.
•Note to Consumer – Keep these
instructions for future reference.
•Note – This appliance must be properly
grounded.
•Proper installation is the responsibility of
the installer.
•Product failure due to improper installation
is not covered under the Warranty.

TOOLS YOU WILL NEED

Flat-blade screwdriver
Jig saw
Ductwork to suit
the installation
Carpenter square

PARTS INCLUDED

Remote raise/lower assembly (for 36″models only)
Stabilizing brackets
(all models) (4)
Wire box (2)
and screws (4)
Plastic strain
relief (2)
Wire and white
connector (1)
Switch cover
plate (1)
Attachment
bracket (1)
Pliers
Duct tape