TM
JVB98SH – GE Profile™ 36" Telescopic Downdraft System
Overall Dimensions (in inches) | Venting Options (in inches) |
27
Through the Floor
36
In Cabinet Discharge (Right)
C
L
In Cabinet Discharge (Down)
In Cabinet Discharge (Left)
Note: Telescopic downdraft vents are not recommended to be installed with cooktops that are flush mounted.
Approved for use with the following GE Profile™ and GE cooktops – 36" and 30" electric models, 36" and 30” gas sealed burner models and 36" and 30" induction models.
Not approved for use with standard burner gas cooktops.
Note: The countertop must be at least 26" deep with a flat surface area of
Note: Dimensions shown are for reference only. Before cutting out countertop, refer to instructions packed with downdraft and cooktop.
Note: Installation in cabinets/countertops against the wall will not be possible in most applications. Against the wall installations are limited to dimension requirements. Refer to installation instructions packed with product for further details.
JXBC67 Outdoor Cover. Optional accessory may be ordered for installation of motor and blower assembly on outside wall.
JXRB67 Indoor Remote Accessory. Optional accessory may be ordered for installation of motor and blower assembly in an indoor remote location.
Installation Information: Before installing, consult installation instructions packed with product for current dimensional data.
Specification Created 7/03
Installation Information: Before installing, consult installation instructions packed with product for current dimensional data.
Listed by
Underwriters
RLaboratories
For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at GEAppliances.com or call
