Installation Instructions
TOOLSYOUWILL NEED
# 1 and #2 Phillips screwdriver | Pencil |
|
Ruler or tape measure and straight edge
Carpenter square (optional)
Tin snips (for cutting damper, if required)
Gloves
Scissors
(to cut template, if necessary)
Saw (saber, hole or keyhole)
Electric drill with 3⁄16″, 1⁄2″ and 5⁄8″ drill bits
Stud finder or Hammer (optional)
Filler blocks or scrap wood pieces, if needed for top cabinet spacing (used on recessed bottom cabinet installations only)
Safety goggles | Duct and masking tape |
Level |
MOUNTING SPACE
13″
max.
161⁄2″
30″
30″ min.
Bottom Edge of Cabinet Needs to be 30″ or More from the Cooking Surface
NOTES:
• The space between the cabinets must be |
30″ wide and free of obstructions. |
• If the space between the cabinets is greater |
than 30″, a Filler Panel Kit may be used to fill |
in the gap between the microwave oven and |
the cabinets. Your Owner’s Manual contains |
66″ or More 
from the Floor to the Top of the Microwave
2″
Backsplash
the kit number for your model. |
• This microwave oven is for installation over |
ranges up to 36″ wide. |
• If you are going to vent your microwave oven |
to the outside, see Hood Exhaust Section for |
exhaust duct preparation. |
• When installing the microwave oven beneath |
smooth, flat cabinets, be careful to follow the |
instructions on the top cabinet template for |
power cord clearance. |
• Models with top venting grilles: Do not allow |
cabinetry or other objects to block the airflow |
of the vent. |
7