GE LBI-38378C manual Specifications, General, Transmitter, Receiver

LBI-38378

	SPECIFICATIONS*
GENERAL
Frequency Bands	136 - 150.8 MHz
(FCC Type Acceptance Number)	146 - 162 MHz (AXATR-182-B5)
	157 - 174 MHz (AXATR-182-C5)
DOC Number	TR-182-D2
Frequency Stability	5.0 ppm
Channel Capacity
Select Model	16
Scan Model	192
System Model	192
Maximum Frequency Separation	full bandsplit
Channel Spacing	30 kHz
Operating Temperature Range	-30°C to +60°C
Maximum Relative Humidity	90% at 55°C
Battery Voltage	7.5 Vdc (nominal)
Dimensions (H x W x D)
less battery, knobs and antenna	140 x 69 x 38 mm (5.52 x 2.72 x 1.50")
with Extra High Cap. Battery	232 x 69 x 40 mm (9.15 x 2.72 x 1.58")
Weight
less battery and antenna	540 grams (19 ounces)
with Extra High Cap. Battery	907 grams (32 ounces)
TRANSMITTER
Rated RF Power Output	6.0 Watts
High / Low RF Power Output	6.0 Watts / 1 Watt (programmable per channel)
Maximum FM Deviation	±5 kHz
FM Hum and Noise	-45dB (companion receiver)
Spurious and Harmonic Emissions	-75 dBc
Audio Response	+1 to -3dB (6 dB/octave pre-emphasis from 300 Hz to 3 kHz)
Audio Distortion	less than 3% (at 1000 Hz tone, 3 kHz deviation)
RECEIVER
Sensitivity (12 dB SINAD)	-116 dBm (0.35 μV)
Adjacent Channel Selectivity	-80dB
Critical Squelch	10dB SINAD
Intermodulation	-78dB
Spurious and Image Rejection	-80dB
Audio Output	500 mW (24-ohm load impedance)
Audio Response	+2 to -8dB (6 dB/octave de-emphasis from 300 Hz to 3 kHz)
Audio Distortion	less than 5% (at 500 mW)

*These specifications are intended primarily for the use of the serviceman. See the appropriate Specifications Sheet for the complete specifications.

3