Dishwasher Installation
STEP 14 – LEVEL DISHWASHER
IMPORTANT – Dishwasher must be level for proper dish rack operation and wash performance.
•For Top Mount Control Models:
Make sure 1/2" minimum gap is maintained.
•For All Models:
Place level on door to check that the dishwasher is level
rack, place level on lower rack track inside tub to
check that the dishwasher is level
��� | ��� | |
��������� | ||
�������� | ||
����� | ||
����� | ||
������ | ||
����� | ||
������� | ||
������� | ||
|
Figure X
•If the dishwasher is not level, adjust the four leveling legs as illustrated in Figure Y.
• If adjustment to the
right rear leveling leg
is required, access it by loosening the junction box bracket screw (through the access hole) and
rotate bracket clockwise.
Figure Y
•The dishwasher is properly leveled when the level indicator is centered left to right and front to back. The dishwasher door should close without hitting the sides of the tub,
•Replace the lower rack when leveling is complete.
Tip: Avoid unnecessary service charges for poor wash performance and rack operation.
Pull the dish racks half way out. They should remain stationary. Open and close the door. The door should fit in the tub opening without hitting the side of the tub. If the racks roll on their own, or the door hits the side of the tub,
IMPORTANT – After leveling, verify that the dishwasher is centered in the enclosure and the door does not hit adjacent cabinets.
STEP 15 – SECURE DISHWASHER TO COUNTERTOP OR CABINET
In this step you will need |
| ������������� |
|
the 2 Phillips special head |
| ||
�������� |
| ||
screws set aside in Step 1. |
| ||
|
| ||
The dishwasher must be |
|
|
|
secured to the countertop |
|
|
|
or the cabinet sides. When |
| ���������� | |
countertops are made of |
| ��� | �������� |
|
| �������� | |
wood, use Method 1. When ����� | |||
countertops are granite or |
|
|
|
other materials that will not | Figure Z |
| |
accept screws, use Method |
| ||
2 to secure dishwasher at the sides. |
| ||
IMPORTANT – |
| Wood Cooktop | |
Avoid unnecessary |
|
|
|
service charges. |
|
|
|
Drive screws straight |
|
|
|
and flush. Protruding |
| Screws |
|
screw heads will |
|
| |
|
|
| |
scratch the top or | Figure AA |
| |
sides of the control |
|
panel and can interfere with door closing.
Method 1
Secure dishwasher to wood countertop
•Fasten the dishwasher to the underside of the countertop with the 2 Phillips special head screws provided.
Method 2
Secure dishwasher with side-mounting brackets
•Remove plug buttons (one on each side).
•Install screws through the dishwasher side mount bracket and into the adjacent cabinet on each side. Reinstall plug buttons.
Granite Countertop
Plug Buttons
Screws
Figure BB
Either
•When step is complete, close dishwasher door and verify that gap between countertop and top of dishwasher door is at least 1/2".
Countertop
1/2" |
|
Min. | Dishwasher Door |
Figure CC
12