GE PDW8400JWW Installation Preparation, Parts Supplied With Installation Kit, Tools You Will Need

Installation Preparation

PARTS SUPPLIED WITH

INSTALLATION KIT:

■ Two #8-18 x 5/8" Phillips special head screws, to secure dishwasher to underside of countertop or sides of cabinets.

■ Junction box cover and #10-1/2" hex head screw ■ Side and top trim

■ Trim Panel Accessory Kit (not shown). Model PDW9700 only

■ Sound upgrade kit (some models)

■ Drain hose (78") , drain hose hanger and hose clamp

■ Literature, Product Samples and/or coupons

■ Hard water test strip (Models with Bulk Dispenser)

Screw Kit

#10 Hex Head

Special Head Screws		J-Box Screw
5/8” long
		1/2" long	Trim Pieces
		Drain Hose Hanger
	Sound Upgrade Kit
	(Some Models)
	Hard Water Test Strip
	(Models with		Drain Hose (78")
	Bulk Dispenser)

Side Trim

Side Trim

Top Trim

Junction

Box Cover

Hose Clamp

MATERIALS YOU WILL NEED:

■ Ferrule, compression nut and 90° Elbow (3/8" NPT external thread on one end, opposite end sized to fit water supply)

■ Thread seal tape

■ UL Listed wire nuts (3)

Materials For New Installations Only:

■ Air gap for drain hose, if required

■ Waste tee for house plumbing, if applicable ■ Electrical cable or power cord, if applicable ■ Screw type hose clamps

■ Strain relief for electrical connection ■ Hand shut-off valve

■ Water line 3/8" min. copper

■ Coupler for extending drain line, if applicable ■ GPF10L 10' drain hose, if needed

90° Elbow,	Hand	Thread	Wire Nuts (3)
Ferrule and	Shut-Off	Seal Tape
Compression Nut	Valve

	Hot Water Line
Waste Tee	Electrical Cable	GPF10L
	(or Power Cord, if applicable)	10' Drain Hose

Air	Screw Type	Strain Relief	Coupler
Gap	Hose Clamps

TOOLS YOU WILL NEED:

■ Phillips head screwdriver ■ 1/4" and 5/16" nutdriver ■ 6" Adjustable wrench

■ Level

■ Carpenters square ■ Measuring tape ■ Safety glasses

■ Flashlight

■ Bucket to catch water when flushing the line ■ 15/16" socket

■ Gloves

For New Installations Only:

■ Tubing cutter

■ Drill and appropriate bits

■ Hole saw set

Phillips	1/4" and	Level
Head	5/16" Nutdriver
Screwdriver

1/4" and	6" Adjustable	Tubing Cutter
15/16" Socket	Wrench	Carpenters
		Square
Flashlight	Safety Glasses	Measuring Tape

2 Gloves Bucket Hole Saw Set Drill and Bits