GE PFIC1NFY dimensions 40-7/8, Each side Top Back, Specification Created 3/09

PFIC1NFY

GE Profile™ Counter-Depth 20.9 Cu. Ft. Bottom-Freezer Drawer Refrigerator

Dimensions and Installation Information (in inches)
	Height to top of hinge (in.) A	69-5/8
	Height to top of case (in.) B	69
Overall Dimensions	Case depth without door (in.) C	23-7/8
	Case depth less door handle (in.) D	26-3/4*
	Case depth with door handle (in.) E	31
			A B
	Depth with fresh food door open 90° (in.) F	43-1/8
	Width (in.) G	35-3/4
	Width with door open 90° inc. door handle (in.) H	40-7/8
Air Clearances	Each side (in.)	1/8
	Top (in.)	1
	Back (in.)	1/2

Note:	Front View
Anti-tip bracket part number 200D8494P001 will be shipped with

H

G

C

D

Top View

E

F

every counter-depth model	Installation of water outlets
*Does NOT include a decorative panel

1/2"

Alternate water

line location through floor

Recommended single loop of 1/4" pex water line

Allow 48" minimum water

line to enable refrigerator 24" to be pulled forward

Water hook-up on the refrigerator

IMPORTANT: Before finalizing specifications for your GE Profile counter-depth refrigerator, please NOTE:

•A minimum width of 36" is required for refrigerator installation

•Be sure to allow for 1/2" or 3/4" side panels in addition to the 36" minimum

For answers to your Monogram,® GE Profile™ or	Top View	18"
GE® appliance questions, visit our website at		Recommended water line
		location using recess
ge.com or call GE Answer Center® service,		in rear wall
		Rear Wall View
800.626.2000.

Listed by

Underwriters

Laboratories

Specification Created 3/09 210811