GE PFIC1NFY Fabricating the enclosure, Dimensions and Installation Information in inches

PFIC1NFY

GE Profile™ Counter-Depth 20.9 Cu. Ft. Bottom-Freezer Drawer Refrigerator

Dimensions and Installation Information (in inches)

Fabricating the enclosure

•The drawing shows an 84" cabinet elevation. Adjust dimensions accordingly for other cabinet elevations.

•Cabinet pieces to order: (2) side panels and (1) wall cabinet.

•Side panels will typically be attached to adjacent cabinets and/or cleated to rear wall and floor.

•Refer to GE refrigerator installation instructions for proper plumbing, and electrical and air clearances.

•(1) Some framed cabinet lines will make a refrigerator enclosure with a cabinet 12" high x 39" wide with sides and 1-1/2" face frame extended down to floor to create the refrigerator space. This will replace the above construction. (2) A tall cabinet on either side of the refrigerator can replace a side panel.

•Counter overhangs on either side of the refrigerator should have clipped corners to allow for full door swing.

•If the refrigerator has a wall returning beyond the front of the refrigerator on either side, a 2" tall filler will help allow for movement of the door.

Door Panels

•See drawings for exact dimensions of the fresh-food and freezer door panels.

•Refrigerator door fronts from stock and most semi-custom cabinet manufacturers will be supplied as 1/4"-thick panels cut to dimensions, with closest available standard door sizes applied to front.

–This will leave a “reveal” at top/bottom and sides. Width of “reveal” will depend on manufacturer’s standard door sizes.

–Door will be affixed on the 1/4" panels at factory or in the field by the local supplier, depending on manufacturer.

•Local shop-built or custom cabinet supplier may fabricate custom 3/4" panels. In this case, edges must be routed.

•Follow notes on drawing to assure room for fingers/hands to open handles.

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

Create a custom look for your GE Profile counter-depth bottom-freezer refrigerator

Still another advantage offered by GE Profile counter-depth refrigerators is ease of installation. For a refrigerator that does so much to enhance the beauty of your kitchen, the “behind-the-scenes” preparation and installation are surprisingly simple.

1/2" to 3/4" Side Panel

Listed by

Underwriters

Laboratories

Specification Created 3/09 210811