TM
PNRQ15F – GE Profile™ Reverse Osmosis Filtration System
Dimensions (in inches)
3/8 Drain Tubing
Disposer
Hot Cold
Sink
Inlet
15"
RO Product
Water Mounted
Through Sink
7"
minimum 4" from bottom of sink to top of horizontal “T” connection
Outlet
Drain
Reverse Osmosis System
11"
Installation and Parts Information
Note: R.O. System can be installed up to 30 feet from
Note: Can be installed under counter (as shown), in basement, or other convenient location. Before installing, see installation instructions packed with product for complete details.
Replacement Membranes, Pre- and Post-Filters
Call SmartWater Services,
GE Reverse Osmosis Models PNRQ15F Series are tested and certified to ANSI/NSF Standard 58 for TDS and cyst reduction. See Performance Data Sheet for details.
Caution: Do not use with water that is microbiologically unsafe or of unknown quality, without adequate disinfection before or after the system. Systems certified for cyst reduction may be used on disinfected water that may contain filterable cysts. This reverse osmosis unit contains a replaceable membrane cartridge treatment component critical for effective removal of Total Dissolved Solids. The water should be tested periodically to verify that the system is performing satisfactorily.
Independently Tested
The GXRM10G has been independently tested by NSF and WQA, two of the most highly recognized testing institutions in the water treatment industry. The PNRQ20F and PNRQ15F have been independently tested by NSF. Product performance testing details by each test facility are specified on the Performance Data Sheet (inside the product box).
Reservoir
11" Dia.
10.5"
| For answers to your Monogram,® GE Profile™ or |
| GE® appliance questions, visit our website at |
Specification Created 02/06 | GEAppliances.com or call |
GE Answer Center® service, 800.626.2000. |
280105