AMX manual NXD-500i Touch Panel Accessories, PS-POE-AF PoE Injector

NXD-500i Touch Panel Accessories

NXD-500i Touch Panel Accessories

The following section outlines and describes both the included accessories and other AMX equipment available for the NXD-500i.

PS-POE-AF PoE Injector

The PS-POE-AF PoE Injector (FG423-80) is a single-port, self-contained Power-over-Ethernet (PoE) power supply that delivers both DC power and data to PoE-equipped devices by “injecting” DC power through a Cat5 Ethernet cable (FIG. 14). The PoE Injector allows devices such as the NXD-500i to function without an additional power connection other than an Ethernet connection.

FIG. 14 PS-POE-AF Power-Over-Ethernet Power Supply

Power-over-Ethernet eliminates the need for an AC outlet at each device installation point, resulting in easier and less expensive installation. It also can be used to extend the distance between the PoE devices and standard power outlets by up to 328 feet (100 meters).

Each PoE Injector may be used for one device’s power needs. Multiple devices in a network that require PoE will require multiple Injectors.

PS-POE-AF Specifications

Output Specifications

Combined Line and Load	Excluding Cord ±1%
Voltage Regulation
Ripple	1% Vp-p max.
Transient Response	• 0.5ms for 50%
	• Load Change Typical
Protection	• Foldback Overcurrent Protection
	• Short Circuit Protection
Input Specifications
AC Input Voltage Range	100-240VAC -10%, +6%
Line Frequency	47-63Hz
AC Input Current	• 90VAC Input
	• 0.6A max.
Protection	• Internal Primary Current Fuse
	• Inrush Limiting

NXD-500i 5" Wall/Flush Mount Touch Panel with Intercom 19