AMX NXD-500i Page Commands Cont, Programming, @Ppm, modal = 1 and non-modal =, @Ppn, @Ppt, @Ppx

Programming

Page Commands (Cont.)

@PPM	A Modal popup page, when active, only allows use of the buttons and features on that
Set the modality	popup page. All other buttons on the panel page are inactivated.
	Syntax:
of a specific
popup page to	"'@PPM-<popup page name>;<mode>'"
Modal or
	Variable:
NonModal.
	popup page name = 1 - 50 ASCII characters. Name of the popup page.
	mode = NONMODAL converts a previously Modal popup page to a NonModal.
	MODAL converts a previously NonModal popup page to Modal.
	modal = 1 and non-modal = 0
	Example:
	SEND_COMMAND Panel,"'@PPM-Popup1;Modal'"
	Sets the popup page ’Popup1’ to Modal.
	SEND_COMMAND Panel,"'@PPM-Popup1;1'"
	Sets the popup page ’Popup1’ to Modal.
@PPN	If the page name is empty, the current page is used (see example 2). If the popup page is
Activate a	already on, do not re-draw it. This command works in the same way as the ’Show Popup’
	command in TPDesign4.
specific popup
	Syntax:
page to launch on
either a specified	"'@PPN-<popup page name>;<page name>'"
page or the
	Variable:
current page.
	popup page name = 1 - 50 ASCII characters. Name of the popup page.
	page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
	Example:
	SEND_COMMAND Panel,"'@PPN-Popup1;Main'"
	Activates ’Popup1’ on the ’Main’ page.
	Example 2:
	SEND_COMMAND Panel,"'@PPN-Popup1'"
	Activates the popup page ’Popup1’ on the current page.
@PPT	If timeout is empty, the popup page will clear the timeout.
Set a specific	Syntax:
popup page to	"'@PPT-<popup page name>;<timeout>'"
timeout within a
	Variable:
specified time.
	popup page name = 1 - 50 ASCII characters. Name of the popup page.
	timeout = Timeout duration in 1/10ths of a second.
	Example:
	SEND_COMMAND Panel,"'@PPT-Popup1;30'"
	Sets the popup page ’Popup1’ to timeout within 3 seconds.
@PPX	This command works in the same way as the 'Clear All' command in TPDesign 4.
Close all popups	Syntax:
on all pages.	"'@PPX'"
	Example:
	SEND_COMMAND Panel,"'@PPX'"
	Close all popups on all pages.

80 NXD-500i 5" Wall/Flush Mount Touch Panel with Intercom