AMX manual Wiring Guidelines for the NXD-500i Panel, Ethernet/RJ-45 Port Connections and Wiring

Installation

Wiring Guidelines for the NXD-500i Panel

The NXD-500i panel utilizes the Power over Ethernet protocol, where it draws power directly from its Ethernet connection. Because of this, the panel has no need for standard power inputs or outputs.

Ethernet/RJ-45 Port: Connections and Wiring

FIG. 12 describes the blink activity for the Ethernet 10/100 Base-T RJ-45 connector and cable. The Ethernet cable is connected to the side of the Wall Mount panels.

A - Activity LED (yellow)	A		L
lights when receiving or
transmitting Ethernet
data packets
		ETHERNET
		10/100

FIG. 12 Ethernet connector (showing communication and connection LEDs)

L - Link LED (green) lights when the Ethernet cables are connected and terminated correctly.

The following table lists the pinouts, signals, and pairing for the Ethernet connector.

Ethernet RJ-45 Pinouts and Signals

Pin	Signals	Connections		Pairing		Color
1	TX +	1 ---------	1	1 ---------	2	Orange-White
2	TX -	2 ---------	2			Orange
3	RX +	3 ---------	3	3 ---------	6	Green-White
4	PoE power	4 ---------	4			Blue
5	PoE power	5 ---------	5	4 ---------	5	Blue-White
6	RX -	6 ---------	6			Green
7	PoE power	7 ---------	7	7 ---------	8	Brown-White
8	PoE power	8 ---------	8			Brown

FIG. 13 diagrams the RJ-45 pinouts and signals for the Ethernet RJ-45 connector and cable.

FIG. 13 RJ-45 wiring diagram

18 NXD-500i 5" Wall/Flush Mount Touch Panel with Intercom