AMX NXD-500i manual Page Commands Cont, Programming, Ppof, Ppog, Ppon

Programming

Page Commands (Cont.)

PPOF	If the page name is empty, the current page is used (see example 2). If the popup page is
Deactivate a	part of a group, the whole group is deactivated. This command works in the same way as
	the ’Hide Popup’ command in TPDesign4.
specific popup
	Syntax:
page on either a
specified page or	"'PPOF-<popup page name>;<page name>'"
the current page.
	Variable:
	popup page name = 1 - 50 ASCII characters. Name of the popup page.
	page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
	Example:
	SEND_COMMAND Panel,"'PPOF-Popup1;Main'"
	Deactivates the popup page ’Popup1’ on the Main page.
	Example 2:
	SEND_COMMAND Panel,"'PPOF-Popup1'"
	Deactivates the popup page ’Popup1’ on the current page.
PPOG	If the page name is empty, the current page is used (see example 2). Toggling refers to the
Toggle a specific	activating/deactivating (On/Off) of a popup page. This command works in the same way
	as the ’Toggle Popup’ command in TPDesign4.
popup page on
	Syntax:
either a specified
page or the	"'PPOG-<popup page name>;<page name>'"
current page.
	Variable:
	popup page name = 1 - 50 ASCII characters. Name of the popup page.
	page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
	Example:
	SEND_COMMAND Panel,"'PPOG-Popup1;Main'"
	Toggles the popup page ’Popup1’ on the Main page from one state to another (On/Off).
	Example 2:
	SEND_COMMAND Panel,"'PPOG-Popup1'"
	Toggles the popup page ’Popup1’ on the current page from one state to another (On/Off).
PPON	If the page name is empty, the current page is used (see example 2). If the popup page is
Activate a	already On, do not re-draw it. This command works in the same way as the ’Show Popup’
	command in TPDesign4.
specific popup
	Syntax:
page to launch on
either a specified	"'PPON-<popup page name>;<page name>'"
page or the
	Variable:
current page.
	popup page name = 1 - 50 ASCII characters. Name of the popup page.
	page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
	Example:
	SEND_COMMAND Panel,"'PPON-Popup1; Main'"
	Activates the popup page ’Popup1’ on the Main page.
	Example 2:
	SEND_COMMAND Panel,"'PPON-Popup1'"
	Activates the popup page ’Popup1’ on the current page.

82 NXD-500i 5" Wall/Flush Mount Touch Panel with Intercom