Configuring Communication

A mini-USB connection is only detected after it is installed onto an active panel. Connection to a previously powered panel which then reboots, allows the PC to detect the panel and assign an appropriate USB driver.

1.Verify this direct USB connection (Type-A on the panel to mini-USB on the panel) is configured properly using the steps outlined in the previous two sections.

2.With the panel already configured for USB communication and the Virtual Master setup within NetLinx Studio, its now time to verify the panel is ready to receive files.

3.Click the OnLine Tree tab in the Workspace window to view the devices on the Virtual System. The default System value is one.

4.Right-click on the System entry (A in FIG. 23) and select Refresh System. This causes a refresh of all project systems, establishes a new connection to the Virtual Master, and populates the System list with devices on your particular system.

FIG. 23 Repopulating the System List

30

NXD-500i 5" Wall/Flush Mount Touch Panel with Intercom

Page 35 Page 37
Page 36
Image 36
AMX NXD-500i manual Repopulating the System List
Page 35 Page 37
Top Page Image Contents