AMX NXD-500i manual Ice, Icm-Talk, Icm-Listen

Programming

Intercom Commands (Cont.)

^ICE'	Intercom end. This terminates an intercom call/connection.
Intercom end.	Syntax:
	SEND_COMMAND <DEV>,"'^ICE'"
	Variables:
	None.
	Example:
	SEND_COMMAND TP1,"'^ICE'"
	SEND_COMMAND TP2,"'^ICE'"
	Terminates an intercom call between two panels.
^ICM-TALK	Intercom modify command. For backwards compatibility, both versions are supported.
^ICM-LISTEN	In this release, however, the TALK and LISTEN subcommands are ignored. The
Intercom modify	microphone and/or speaker are activated based on the initial mode value of the intercom
	start command and the audio data packet flow is started upon receipt of this command by
command.
	the panel.
	Syntax:
	SEND_COMMAND <DEV>,"'^ICM-TALK'"
	Variables:
	None.
	Example:
	SEND_COMMAND TP1,"'^ICM-TALK'"

128 NXD-500i 5" Wall/Flush Mount Touch Panel with Intercom