AMX NXD-500i manual Button Commands Cont, Programming, ENA-vt addr range,command value

Programming

"^" Button Commands (Cont.)

^ENA	Syntax:
Enable or	"'^ENA-<vt addr range>,<command value>'"
disable buttons	Variable:
with a set
	variable text address range = 1 - 4000.
variable text
	command value = (0= disable, 1= enable)
range.
	Example:
	SEND_COMMAND Panel,"'^ENA-500.504&510.515,0'"
	Disables button pushes on buttons with variable text range 500-504 & 510-515.
^FON	Font ID numbers are generated by the TPDesign4 programmers report.
Set a font to a	Syntax:
specific Font ID	"'^FON-<vt addr range>,<button states range>,<font value>'"
value for those
	Variable:
buttons with a
defined address	variable text address range = 1 - 4000.
range.	button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
	1 = Off state and 2 = On state).
	font value = Range = 1 - XXX. Refer to theDefault Font Styles and ID Numbers table on
	page 85.
	Example:
	SEND_COMMAND Panel,"'^FON-500.504&510.515,1&2,4'"
	Sets the font size to font ID #4 for the On and Off states of buttons with the variable text
	range of 500-504 & 510-515.

The Font ID is generated by TPD4 and is located in TPD4 through the Main menu. Panel > Generate Programmer's Report >Text Only Format >Readme.txt.

"^" Button Commands (Cont.)

^GDI

Change the bargraph drag increment.

Syntax:

"'^GDI-<vt addr range>,<bargraph drag increment>'"

Variable:

variable text address range = 1 - 4000.

bargraph drag increment = The default drag increment is 256.

Example:

SEND_COMMAND Panel,"'^GDI-7,128'"

Sets the bargraph with variable text 7 to a drag increment of 128.

NXD-500i 5" Wall/Flush Mount Touch Panel with Intercom 101