AMX NXD-500i manual Button Commands Cont, Programming

Programming

"^" Button Commands (Cont.)

^BMI	Mask image is used to crop a borderless button to a non-square shape. This is typically
Set the button	used with a bitmap.
mask image.	Syntax:
	"'^BMI-<vt addr range>,<button states range>,<mask image>'"
	Variable:
	variable text address range = 1 - 4000.
	button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
	1 = Off state and 2 = On state).
	mask image = Graphic file used.
	Example:
	SEND_COMMAND Panel,"'^BMI-530,1&2,newMac.png'"
	Sets the button with variable text 530 ON/OFF state mask image to 'newmac.png'.
^BML	If this value is set to zero (0) there is no max length. The maximum length available is
Set the maximum	2000. This is only for a Text area input button and not for a Text area input masking button.
length of the text	Syntax:
area button.	"'^BML-<vt addr range>,<max length>'"
	Variable:
	variable text address range = 1 - 4000.
	max length = 2000 (0=no max length).
	Example:
	SEND_COMMAND Panel,"'^BML-500,20'"
	Sets the maximum length of the text area input button to 20 characters.
^BMP	Syntax:
Assign a picture to	"'^BMP-<vt addr range>,<button states range>,<name of bitmap/
those buttons with	picture>'"
a defined address	Variable:
range.	variable text address range = 1 - 4000.
	button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
	1 = Off state and 2 = On state).
	name of bitmap/picture = 1 - 50 ASCII characters.
	Example:
	SEND_COMMAND Panel,"'^BMP-500.504&510.515,1,bitmap.png'"
	Sets the OFF state picture for the buttons with variable text ranges of 500-504 & 510-515.
^BNC	Syntax:
Clear current	"'^BNC-<vt addr range>,<command value>'"
TakeNote	Variable:
annotations.
	variable text address range = 1 - 4000.
	command value = (0= clear, 1= clear all).
	Example:
	SEND_COMMAND Panel,"'^BNC-973,0'"
	Clears the annotation of the TakeNote button with variable text 973.
^BNN	Syntax:
Set the TakeNote	"'^BNN-<vt addr range>,<network name>'"
network name for	Variable:
the specified
	variable text address range = 1 - 4000.
Addresses.
	network name = Use a valid IP Address.
	Example:
	SEND_COMMAND Panel,"'^BNN-973,192.168.169.99'"
	Sets the TakeNote button network name to 192.168.169.99.

96 NXD-500i 5" Wall/Flush Mount Touch Panel with Intercom