AMX NXD-500i manual Clearing the Panel Connections Log, Panel Statistics

Setup Pages and Descriptions

Clearing the Panel Connections Log

1.Press the Tools button in the Protected Setup Navigation Buttons section. This opens the Tools menu.

2.Within the Tools menu, press the Panel Logs button.

3.Push the Clear button and confirm your selection.

Panel Statistics Page

The options on the Panel Statistics page allow you to track the connection status for the panel. The Panel Statistics page tracks ICSP messages, Blink messages, and Ethernet connection statistics (FIG. 54).

FIG. 54 Panel Statistics page

Features on this page are as follows:

Panel Statistics Page

Back:	Saves all changes and returns to the previous page.
Connection Status icon:	The icon in the upper-right corner of each Setup page shows online/offline state of
	the panel to the master.
	• Bright red - disconnected
	• Bright green - connected. Blinks when a blink message is received to dark green
	every 5 seconds for half a second then go back to bright green.
	• Bright yellow - panel missed a blink message from the master. It will remain
	yellow for 3 missed blink messages and then turn red. It will return to green
	when a blink message is received.
	Note: a Lock appears on the icon if the panel is connected to a secured NetLinx
	Master.
ICSP Messages	Messages sent between the master and the touch panel; it is the protocol they use
	to communicate to each other.
Total	• Received - The total ICSP messages received by the panel.
	• Processed - The total ICSP messages processed by the panel.
	• Dropped - The total ICSP messages dropped by the panel.
Last 15 Minutes	• Received - The total ICSP messages received by the panel in the last 15
	minutes.
	• Processed - The total ICSP messages processed by the panel in the last 15
	minutes.
	• Dropped - The total ICSP messages dropped by the panel in the last 15 minutes.
Blink Messages	The master sends this message once every 5 seconds to all connected devices.

72 NXD-500i 5" Wall/Flush Mount Touch Panel with Intercom