Configuring Communication
The System Number is assigned to the Master within the AMX software application
(these must match)
Enter the IP Address information of the PC used as a Virtual Master
When using a Virtual Master, there is no need to enter a username and/or password
FIG. 26 Sample System Connection page (for Virtual Master communication)
17.Click Done to accept the new value and return to the System Connection page.
18.Do not alter the Master Port Number value. This is the default value used by NetLinx.
19.Press the Back button to open the Protected Setup page.
20.Press the
Master Connection section - NetLinx Master Ethernet IP Address - URL Mode
In this mode, enter the System Number (zero for an unknown System Number) and the IP/URL of the Master (Master Port Number is defaulted to 1319).
1.Press the blue Type field from the Master Connection section until the choice cycles to Ethernet (FIG. 26). Refer to the System Settings Page section on page 59 for more information about the fields on this page.
2.Press the Mode field until the choice cycles to URL.
By selecting URL, the System Number field becomes
If the panel does not appear within the OnLine Tree tab of the Workspace window of NetLinx Studio, check to make sure that the NetLinx Master System Number from within the Device Addressing dialog is correctly assigned.
3.Press the Master IP/URL field to open a Keyboard and enter the Master IP Address obtained from the Diagnostics - Networking Address dialog of the NetLinx Studio application.
4.Click Done to accept the new value and return to the System Connection page.
5.Do not alter the Master Port Number value. This is the default value used by NetLinx.
6.Enter a username and password (into their respective fields) if the target Master has been previously secured.
7.Press the Back button to open the Protected Setup page.
8.Press the
35 | |
|
|
