AMX NXD-500i manual Dynamic Image Commands, Programming

Programming

Dynamic Image Commands

The following is a listing and description of each Dynamic Image Command.

Dynamic Image Commands

^BBR	Syntax:
Set the bitmap of	"'^BBR-<vt addr range>,<button states range>,<resource name>'"
a button to use a	Variable:
particular
	variable text address range = 1 - 4000.
resource.
	button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
	1 = Off state and 2 = On state).
	resource name = 1 - 50 ASCII characters.
	Example:
	SEND_COMMAND Panel,"'^BBR-700,1,Sports_Image'"
	Sets the resource name of the button to ’Sports_Image’.
^RAF	See page 126.
^RFR	Syntax:
Force a refresh for	"'^RFR-<resource name>'"
a given resource.	Variable:
	resource name = 1 - 50 ASCII characters.
	Example:
	SEND_COMMAND Panel,"'^RFR-Sports_Image'"
	Forces a refresh on ’Sports_Image’.
^RMF	Syntax:
Modify an	"'^RMF-<resource name>,<data>'"
existing resource.	Variable:
	resource name = 1 - 50 ASCII characters
	data = Refer to the table in the RAF command for more information.
	Example:
	SEND_COMMAND Panel,"'^RMF-Sports_Image,%ALab_Test/
	Images%Ftest.jpg'"
	Changes the resource ’Sports_Image’ file name to ’test.jpg’ and the path to ’Lab_Test/
	Images’.
^RSR	Syntax:
Change the	"'^RSR-<resource name>,<refresh rate>'"
refresh rate for a	Variable:
given resource.
	resource name = 1 - 50 ASCII characters.
	refresh rate = Measured in seconds.
	Example:
	SEND_COMMAND Panel,"'^RSR-Sports_Image,5'"
	Sets the refresh rate to 5 seconds for the given resource (’Sports_Image’).

NXD-500i 5" Wall/Flush Mount Touch Panel with Intercom 125