AMX NXD-500i manual Button Commands Cont, Programming, SENDCOMMAND Panel,GSC-500,12

					Programming
"^" Button Commands (Cont.)
^GSC	A user can also assign the color by Name and R,G,B value (RRGGBB or RRGGBBAA).
Change the	Syntax:
bargraph slider	"'^GSC-<vt addr range>,<color value>'"
color or joystick
	Variable:
cursor color.
	variable text address range = 1 - 4000.
	color value = Refer to theRGB Values for all 88 Basic Colors table on page 83.
	Example:
	SEND_COMMAND Panel,"'^GSC-500,12'"
	Changes the bargraph or joystick slider color to Yellow.
^GSN	Slider names and cursor names can be found in the TPDesign4 slider name and cursor
Change the	drop-down list.
	Syntax:
bargraph slider
name or joystick	"'^GSN-<vt addr range>,<bargraph slider name>'"
cursor name.
	Variable:
	variable text address range = 1 - 4000.
	bargraph slider name = See table below.
		Bargraph Slider Names:
		None	Ball	Circle -L
		Circle -M	Circle -S	Precision
		Rectangle -L	Rectangle -M	Rectangle -S
		Windows	Windows Active
		Joystick Cursor Names:
		None	Arrow	Ball
		Circle	Crosshairs	Gunsight
		Hand	Metal	Spiral
		Target	View Finder
	Example:
	SEND_COMMAND Panel,"'^GSN-500,Ball'"
	Changes the bargraph slider name or the Joystick cursor name to ’Ball’.
^ICO	Syntax:
Set the icon to a	"'^ICO-<vt addr range>,<button states range>,<icon index>'"
button.	Variable:
	variable text address range = 1 - 4000.
	button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
	1 = Off state and 2 = On state).
	icon index range = 0 - 9900 (a value of 0 is clear).
	Example:
	SEND_COMMAND Panel,"'^ICO-500.504&510.515,1&2,1'"
	Sets the icon for On and Off states for buttons with variable text ranges of 500-504 &
	510-515.

NXD-500i 5" Wall/Flush Mount Touch Panel with Intercom 103