AMX NXD-500i manual Upgrading Modero Firmware

Table of Contents
Master Connection section - NetLinx Master Ethernet IP Address - Auto Mode	36
Using G4 Web Control to Interact with a G4 Panel	37
Using the NetLinx Master to control the G4 panel	38
Upgrading Modero Firmware	43
Upgrading the Firmware via the USB port	43
Step 1: Configure the panel for a USB Connection Type	43
Step 2: Prepare NetLinx Studio for communication via the USB port	44
Step 3: Confirm and Upgrade the firmware via the USB port	45
Setup Pages and Descriptions	47
Setup Navigation Buttons	47
Protected Setup	47
Setup Page	48
Information	50
Panel Information Page	50
Panel Information Page	51
Time & Date Settings Page	53
Audio Settings Page	54
Supported sampling rates for WAV	55
Protected Setup Navigation Buttons	56
Protected Setup Page	57
System Settings Page	59
Calibration Page	61
G4 Web Control Page	62
Other Settings	64
Cache Settings Page	64
Setting the image cache	65
Clearing the image cache	66
Checking image cache status	66
Password Settings Page	67
Sensor Setup	68
Making the most of the Light bargraph	69
Making the most of the Motion Sensor feature	69
Tools	70
Panel Logs Page	71
Checking the Panel Connection Logs	71
Refreshing the Panel Connections Log	71
Clearing the Panel Connections Log	72
Panel Statistics Page	72
Checking the Panel Statistics	73

ii NXD-500i 5" Wall/Flush Mount Touch Panel with Intercom