AMX NXD-500i Protected Setup Page Elements Cont, Setup Pages and Descriptions, Demo pages, Number

Setup Pages and Descriptions

Protected Setup Page Elements (Cont.)

System Recovery:	Either resets the touch panel to factory default settings and/or wipes out all
	existing touch panel pages:
	• The Reset System Settings button allows a user to wipe out all current
	configuration parameters on the touch panel (such as IP Addresses, Device
	Number assignments, Passwords, and other presets).
	- Pressing this button launches a Confirmation dialog (FIG. 43) which asks
	you to confirm your selection.
	- This dialog is configured with a delay timer that does not enable the YES
	button for 5 seconds. This delay provides an additional amount of time for
	the user to confirm their decision.
	• The Remove User Pages button allows the removal of all current TPD4
	touch panel pages currently on the panel (including the pre-installed AMX
	Demo pages).
	- Pressing this button launches a Confirmation dialog (FIG. 43) which asks
	to confirm your selection.
	- This dialog is configured with a delay timer that does not enable the YES
	button for 5 seconds. This delay provides an additional amount of time for
	the user to confirm their decision.
Reboot/Shutdown Panel:	Reboot: Pressing this button causes the panel to restart after saving any
	changes.
	Shutdown: Pressing this button causes the panel to shut down after saving
	any changes.

This dialog has a wait time of 5 seconds before the YES option is enabled.

FIG. 43 Protected Setup page-System Recovery confirmation dialog

Channel Port

Channel Port	Channel Code
	Number

7,10

Channel Code Number

3,132			Address
Level Port	Button		Port
2,8		3,50

Channel Code

NumberAddress Code

Number

FIG. 44 Button/slider Function Show example

Level Port

Channel Code

Number

Slider

4,9 1,8

Address

Port

Address Code Number

58 NXD-500i 5" Wall/Flush Mount Touch Panel with Intercom