installation

Safety instructions for the installation

This oven may be installed only by an approved electrician. The installer is responsible for connecting the appliance to the mains and in so doing for observing the relevant safety regulations.

Ensure protection from live parts when installing the oven.

The kitchen cabinet in which the oven is built in must satisfy stability requirements as specified in DIN 68930.

Technical specifications

Input voltage / frequency

230 V ~ 50 Hz

Volume (usable capacity)

65 ℓ

Output rating

max. 3400 W

Net weight

approx. 35 kg

Weight with packaging

approx. 40 kg

Housing (W x H x D)

595 x 595 x 566 mm

Oven interior (W x H x D)

440 x 365 x 405 mm

 

566

 

560

595

572

 

595

21

Power connection

If the appliance is not connected to the mains with a plug, a multi-pole isolator switch (with at least 3 mm contact spacing)

must be provided in order to satisfy safety regulations.

The power cable (H05 RR-F or H05 VV-F, min. 1.5 m, 1.5 ~ 2.5 mm²) must be of sufficient length to be connected to the oven, even if the oven stands on the floor in front of

its built-in cabinet. Open the rear connection cover of the oven with a screwdriver and loosen the screws of the cable clamp before you connect the power lines to the relevant

connection terminals. The oven is earthed via the ()-terminal. If the oven is connected to the mains with a plug, this plug must remain accessible after the oven is installed. Samsung will take no responsibility for accidents that originate from a missing or faulty earth connection.

Installation in the cabinet

This is a built-in oven, which needs to be installed into an upper or lower cabinet.

Observe minimum distances.

Fix oven on both sides using

screws

After installation, remove the vinyl protective film from the door to the appliance and the protective film from the interior surfaces of the oven.

min. 550

min. 550

min. 590

min. 50

min. 600

min. 50

max. 600

 

 

 

 

 

 

min. 560

 

min. 560

 

 

Upper Cabinet

 

Lower Cabinet

4_installation

Page 4
Image 4
Samsung BF1N4T023/SLI manual Technical specifications, Power connection, Installation in the cabinet

BF1N4T023/SLI specifications

The Samsung BF1N4T023/SLI represents a significant advancement in the realm of displays, particularly in the context of consumer electronics. This cutting-edge screen is recognized for its exceptional performance, catering to both gaming enthusiasts and professionals who demand high-quality visuals.

At its core, the Samsung BF1N4T023/SLI showcases a stunning display resolution, typically defined by QLED technology. This innovation provides a broader color spectrum and Enhanced brightness levels compared to traditional LED screens. The Quantum Dot technology ensures that colors are vibrant and accurate, making the experience more immersive for viewers.

One of the main features of the BF1N4T023/SLI is its high refresh rate, which typically reaches up to 144Hz. This characteristic is particularly beneficial for gaming, as it allows for smoother motion and reduced blur during fast-paced gameplay. The rapid refresh rate, combined with low response time, contributes to an ultra-responsive feel, enabling gamers to react swiftly during critical moments.

Moreover, the BF1N4T023/SLI is equipped with cutting-edge HDR (High Dynamic Range) capabilities. This technology significantly enhances the contrast and brightness of the display, allowing users to experience a wider dynamic range of colors. HDR helps to highlight subtle details in shadows and bright areas, enriching the overall viewing experience.

Another noteworthy aspect of this model is its sleek design. The minimalistic bezels not only provide a modern aesthetic but also maximize the screen space, allowing for an immersive experience that draws users in. Additionally, the ergonomic design ensures user comfort during extended viewing sessions, whether it be for gaming or professional use.

Connectivity options also play a vital role in the flexibility of the BF1N4T023/SLI. With multiple input ports, including HDMI and DisplayPort, users can easily connect various devices, such as gaming consoles, PCs, and streaming devices. This versatility ensures that the display can meet the needs of a diverse range of users.

In summary, the Samsung BF1N4T023/SLI stands out in the competitive market of high-performance displays. With its exceptional QLED technology, high refresh rate, HDR capabilities, and sleek design, it’s an ideal choice for both gamers and professionals alike, delivering an unparalleled visual experience that meets the demands of modern multimedia consumption.