Samsung BF1N4T023/SLI manual Warranty & service, Troubleshooting, Error and Safety codes

warranty & service

Troubleshooting

PROBLEM	SOLUTION
What should I do if the oven	• The oven may not be switched on. Switch the oven on.
doesn’t heat up?	• The clock may not be set. Set the clock (see section
	“Time Setting”).
	• Check to see if the required settings have been applied.
	• A household fuse may have blown or a circuit breaker
	may have tripped. Replace the fuses or reset the circuit.
	If this happens repeatedly, call an authorised electrician.
What should I do if, even	• There may be problems with the internal electrical
though the oven function and	connections. Call your local service centre.
temperature have been set, the
oven does not heat up?
What should I do if an error	• There is a fault in the internal electrical circuit
code appears and the oven	connection. Call your local service centre.
does not heat up?
What should I do if the time	• There was a power failure. Set the clock (see section
display is blinking?	“Time Setting”).
What should I do if the oven	• The oven light is faulty. Replace the oven light bulb (see
light doesn’t illuminate?	section “Bulb Exchange”).
What should I do if the oven’s	• Following use, the oven’s fan runs until the oven has
fan is running without having	cooled down. Call your local service centre if the fan
been set?	continues to run after the oven has cooled down.

Error and Safety codes

CODE	PROBLEM	SOLUTION
	An error of the oven may cause	Call local SAMSUNG service
	low performance and problems	centre.
	in safety. Stop using the oven
	immediately.
	SAFETY SHUTOFF	Turn oven off and remove food.
	Oven has continued operating	Allow oven to cool before using
	at set temperature for prolonged	again.
	time.
	If you did not select an appropriate	Select the correct temperature for
	temperature for the mode.	the mode.
		(see section “Using the Fast
		Preheating mode”)

1) * refers to all numbers or characters.

e ervic y & snt warra

warranty & service_11