Installation Instructions
Models PNRQ20FBL, PNRQ20FWW,
PNRQ20FBB and PNRQ20FCC
Questions? Call 800.GE.CARES (800.432.2737) or Visit our Website at: ge.com
WARNING: Read entire manual. Failure to follow all guides and rules could cause personal injury or property damage.
•Check with your state and/or local public works department for plumbing codes. You must follow their guides as you install the Water Filtration system.
NOTE: Failure to comply with these installation instructions will void the product warranty, and the installer will be responsible for any service, repair or damages caused thereby.
TOOLS AND MATERIALS REQUIRED FOR INSTALLATION
•Electric drill and
•Two (2) Adjustable Wrenches
•1/16″ Drill Bit (optional for pilot holes)
•Tape Measure
•Phillips and Flat Blade Screwdrivers
•Utility Knife
•If your main water line is a rigid pipe, you will require a compression fitting and possibly other plumbing hardware to complete the installation.
CAUTION: To avoid damaging the sink, consult a qualified plumber or installer for drilling procedures. Special drill bits may be needed for porcelain or stainless steel.
BEFORE BEGINNING INSTALLATION
Read these instructions completely and carefully.
•IMPORTANT — Save theseinstructions for local inspector’s use.
•IMPORTANT — Observe all governing codes and ordinances.
•Note to Installer – Be sure to leave these instructions with the Consumer.
•Note to Consumer – Keep these instructions for future reference.
•Proper installation is the responsibility of the installer.
•Product failure due to improper installation is not covered under the Warranty.
•A shutoff valve must be available or added near the installation point.
CONTENTS INCLUDED
WITH PRODUCT
•Reverse Osmosis Assembly and Tubing
•Product Literature (Owner’s Manual and Installation Instructions)
•Performance Data Sheet
•Feed Water Adapter and Supply Valve
•Faucet Assembly with Electronic Base Monitor and Tubing
•Storage Tank
•Drain Line Adapter
6