IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING! For your safety, the information in this manual must be followed to minimize the risk of electric shock, property damage or personal injury.

SAFETY PRECAUTIONS

Check and comply with your state and local codes. You must follow these guidelines.

Use care when handling the water softening system. Do not turn upside down, drop, drag, or set on sharp protrusions.

Water softening systems using sodium chloride (salt) for regeneration add sodium to the water.

Persons on sodium restricted diets should consider the added sodium as part of their overall intake. Potassium chloride can be used as an alternative to sodium chloride.

The water softening system works on 24 volt-60 Hz electrical power only. Be sure to use only the included transformer.

Keep the salt hole cover in place on the softener unless servicing the unit or refilling with salt.

WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

PROPER INSTALLATION

This water softening system must be properly installed and located in accordance with the Installation Instructions before it is used.

Install or store where it will not be exposed to temperatures below freezing or exposed to any type of weather. Water freezing in the system will break it. Do not attempt to treat water over 100°F.

Do not install in direct sunlight. Excessive sun heat may cause distortion or other damage to non-metallic parts.

Properly ground to conform with all governing codes and ordinances.

Use only lead-free solder and flux for all sweat- solder connections, as required by state and federal codes.

The water softening system requires a minimum water flow of three gallons per minute at the inlet. Maximum allowable inlet water pressure is 125 psi. If daytime pressure is over 80 psi, nighttime pressure may exceed the maximum. Use a pressure reducing valve to reduce the flow if necessary.

Softener resins may degrade in the presence of chlorine above 1 ppm. If you have chlorine in excess of this amount, you may experience less life of the resin. In these conditions, you may wish to consider purchasing a GE point-of-entry household filtration system with a chlorine reducing filter. Contact the GE Answer Center at 1-800-626-2000 for more information.

WARNING: Discard all unused parts and packaging material after installation. Small parts remaining after the installation could be a choke hazard.

READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY.

SAVE THESE INSTRUCTIONS

3

Page 3
Image 3
GE PNSF39Z01 owner manual Safety Precautions

PNSF39Z01 specifications

The GE PNSF39Z01 is a top-of-the-line smart refrigerator that seamlessly combines advanced technology with energy efficiency, providing an elevated user experience in modern kitchens. Designed by General Electric, a leader in home appliance innovation, this refrigerator boasts an array of features aimed at maximizing convenience and functionality.

One of the standout characteristics of the PNSF39Z01 is its spacious interior, providing ample storage with adjustable shelving and humidity-controlled drawers. This flexibility allows users to customize their storage space according to their needs, catering to varying sizes and types of food items. The refrigerator also features a dedicated freezer section, ensuring that frozen foods are easily accessible and well-organized.

The PNSF39Z01 incorporates GE's advanced cooling technology, which includes a multi-air flow system. This system ensures consistent temperatures throughout the refrigerator, maintaining optimal freshness for perishables. Additionally, the refrigerator is equipped with LED lighting, which not only enhances visibility but also consumes less energy compared to traditional bulbs.

One of the key technologies in this model is the built-in Wi-Fi connectivity. This allows users to control and monitor their refrigerator remotely through a smartphone app, receiving alerts for door ajar situations or filter replacements. The integration of smart technology extends to voice control compatibility with platforms like Amazon Alexa and Google Assistant, allowing hands-free management of settings.

To enhance the water and ice dispensing experience, the PNSF39Z01 features a filtered water dispenser and an advanced ice-making system. The refrigerator includes a reverse osmosis filtration system that ensures clean, great-tasting water is always available. The ice maker produces both crushed and cubed ice, catering to various beverage needs.

Energy efficiency is another hallmark of the GE PNSF39Z01. It meets or exceeds Energy Star standards, significantly reducing electricity consumption while maintaining impeccable performance. This not only benefits the environment but also helps consumers save on energy bills.

Furthermore, the refrigerator's sleek design is complemented by a fingerprint-resistant stainless steel finish, making it easy to maintain. The modern aesthetic integrates well with a variety of kitchen styles, ensuring that it not only functions exceptionally but also looks stylish.

In conclusion, the GE PNSF39Z01 refrigerator stands out for its impressive features, including advanced cooling technologies, smart home connectivity, water and ice dispensers, and energy efficiency. It is a versatile appliance that enhances everyday kitchen tasks and elevates the overall culinary experience.