About the control and settings.

www.GEAppliances.com

Control Settings

Safety Instructions

The controls give you three setting options.

RED WINE—Use for the storage of red wines. This setting will provide a storage temperature of 55°F (13°C), which is optimum for the storage of red wine.

WHITE WINE—Use for the storage of white wines. This setting will provide a storage temperature of 45°F (7°C), which is optimum for the storage of white wine.

CUSTOM TEMP—This setting allows you to customize the temperature when storing both red and white wines. The custom temperature can be set anywhere between 40° to 65°F

(4° to 18°C). The recommended temperature when storing half red wine and half white wine is 50°F (10°C).

Press the CUSTOM TEMP pad. This will convert the RED WINE and WHITE WINE pads into temp up and temp down pads. Short taps to these pads will change the temperature setting slowly. To change the temperature setting more quickly, press and hold the pad.

When you make your selection (WHITE WINE, RED WINE or CUSTOM TEMP) you will see the set temperature show up in the display. However, shortly after the selection has been made, the display will show the actual temperature of the wine chiller. You will then see the temperature in the display change as the actual temperature of the wine chiller reaches the set temperature.

NOTE: In the event of a power failure, when the power is restored, the controls automatically are set to the RED WINE setting. If needed, reset the controls to the desired setting.

Instructions

Operating

Care and

Loading the Wine

As with any refrigeration product, there is a slight temperature variance at different locations within the cabinet. In this wine chiller, the lower shelves provide a slightly cooler temperature than the upper shelves.

When storing both red and white wines, it is best to store the white wine on the lower shelves where the temperature is slightly cooler.

Suggested bottle arrangement

Cleaning

Troubleshooting Tips

When the Wine Chiller is Plugged In

After plugging in the wine chiller and making your selection (WHITE WINE, RED WINE or CUSTOM TEMP), allow the wine chiller to reach the set temperature before loading your wine. This may take up to 12 hours to completely stabilize.

After loading the wine, you may notice the actual temperature rise. The adjustment of the actual temperature reaching the set temperature will be reflected in the display. This may take up to 12 hours to completely stabilize.

5

Consumer Support

Page 5
Image 5
GE Profile Wine Chiller About the control and settings, Loading the Wine, When the Wine Chiller is Plugged