GE PSB2200NBB, PSB2200NWW dimensions GE Profile Advantium 240 Wall Oven, Installation Information

PSB2200N

GE Profile Advantium® 240 Wall Oven

Advantium wall oven/GE Profile cooking tower dimensions and cabinet installation information (in inches)

Cabinet width

4-3/16

Note: Cabinets installed adjacent to wall ovens must have an adhesion spec of at least a 194°F temperature rating.

Note: 2" minimum between cutouts when installed above warming drawer or single wall oven.

Installation

Information:

Before installing,

21-1/2"

Excluding

Handle

A

Conduit

19-1/32"(48-1/2" long)

29-25/32"

30

23-1/2"						Junction box location (240-volt models o
Cutout depth				A
					B
	Junction
	box
	location	H
B	(240-Volt		D
17-1/2"	models only)					2-1/2" MIN between cutouts
			Excluding			recommended—2" MIN required
Cutout height			Handle
			W
	Construct Solid			A	B
						Construct Solid Bottom
	Bottom Min.
			Conduit
Required	3/8" Plywood					MIN 3/8" Plywood Supported by
	Supported by		(46" long)			2 x 4 or 1 x 2 Runners, all Four Sides.
cutout location
	2 x 4 or 1 x 2					(Must Support 150 lbs. for Advantium)
36-3/4"
						(Must Support 200 lbs. for Wall Oven)
	Runners, all
minimum
	Four Sides.
from floor
	(Must Support
						9-1/4" cutout height
	150 lbs.)
						28-1/2" cutout width
						2" MIN between cutouts

consult installation instructions packed with product for current­ dimensional data.

A=Allow 1" overlap of oven over top and bottom edges of cutout.

B=Allow 11/16"-3/4" for overlap ov oven over side edges of cutout.

A=Allow 7/8” overlap of oven over bottom and 1/4" overlap at top edges of cutout.

B=Allow 2-1/8” for overlap of oven over side edges of cutout.

1" Min. above toekick or adjust to oven installation height

A=Allow 7/8” overlap of oven over bottom and 1/4" overlap at top edges of cutout.

B=Allow 2-1/8” for overlap of oven over side edges of cutout.

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

Suitable bracing to support runners

C

L

21-5/8"

over centerline of cabinet

(Must support 130 lbs.)

2 x 4’s or
					D			Z
equivalent
		Cabinet	W	H	Depth	X	Y	Cutout
solid floor
		Width	Width	Height	(excluding	Cutout	Cutout	Depth
		(inches)			handle)	Width	Height	(minimum)
	PSB2200/1 without	30	29-25/32	19-1/8	21-1/2	25-1/8	17-1/2	23-1/2
	accessory drawer
	PSB2200/1 with	30	29-25/32	22-1/4	21-3/4	25-1/8 to	21	23-1/2
	accessory drawer					28-1/2*
	*For existing cutouts a maximum width of 28-1/2" is acceptable
								Listed by
								Underwriters
								Laboratories

Specification Created 9/08 240442