GE PSB42LSR dimensions 25-3/8 Case Depth, Case Width 81-3/4 at Rear, From Floor to, Top Frame

PSB42LSR – GE Profile™ 42" Built-In Stainless Side-By-Side Refrigerator with Electronic Dispenser

Dimensions (in inches)

25-3/8" Case Depth

Product Clearances

These refrigerators are equipped with a 2 position door stop. The factory set 130° door swing can be adjusted to 90° if clearance to adjacent cabinets or walls is restricted.

41"

Case Width

*81-3/4"

at Rear

*Shipping height

*The front height may be adjusted from 83-1/2" to 84-1/2" by adjusting front and rear leveling legs a maximum of 1".

*84" From

Floor to

130° Door Swing

A B

D

90° Door Swing

23-7/8" Behind Frame

C

D

Top Frame

Models	A	B	C	D
42"	12-3/16"	16"	24"	4"

Stainless Steel Wrapped Refrigerators

Stainless Steel wrapped refrigerators have wrapped doors and grille panels, and beveled edges. These models are shipped ready for installation.

42" Frame-to-Frame

Allow minimum clearances for Freezer door (Dimension A) and Fresh Food door (Dimension B) for a full 130° door swing and to allow for drawer removal.

Four inch (4") minimum clearance is required when door swing is adjusted to 90°. If the 90° door stop position is used, drawer access is maintained, but drawer removal is restricted.

Depth Including

Handles 26-7/8"

Specification Revised 1/06

Listed by

Underwriters

Laboratories

Total volume and shelf area are calculated by the Association of Home Appliance Manufacturers’ standards.

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

210319