23
English

About Bluetooth device

Cannot pair the Bluetooth enabled device
with the car audio system.
%" 
required for the syst em.
The Bluetooth funct ion of the device is
not enabled. Refer to the use r manual of
the device for how to enable the f unction.
The audio quality is poor after connection
with a Bluetooth-enabled device.
The microphone is not correctly
positioned. Adjust the position of the
"' #
microphone onto the dashboard where
close to the driver.
The Bluetooth receptio n is poor. Move
the device closer to the car audi o system
or remove any obstacle bet ween the
device and the system .
Music playback is unavailable on the system
even after successful Bluetooth connection.
The device cannot be used wi th the system to
play music.
The paired mobile phone connects and
disconnects constantly.
The Bluetooth receptio n is poor. Move
the mobile phone closer to the c ar audio
system or remove any obst acle between
the mobile phone and the sy stem.
Some mobile phones may conne ct and
disconnect constantly when you make
or end calls. This does not in dicate any
malfunction of the sys tem.
" ]
connection may be deac tivated
automatically as a power- saving feature.
This does not indicate any malf unction of
the system.
11 Troubleshooting
Caution
Never remove th e casing of this device .
%#$""
the system yourself.
If you encounter problems when using this
#$""
requesting service. If the problem remains
"$$$$
FJ&""
ensure that your apparatus is nearby and the
model number and serial number are available.
No power or no sound.
Car engine is not on. Turn the car e ngine
on.
Cable is not connected properly. Check
connections.
Fuse is burnt. Replace fuse.
Volume is too low. Adjust volume.
`""" 
the RESET button .
Ensure that the track pl ayed is of a
compatible format.
Noise in broadcasts.
Signals are too weak. Sel ect other
stations with stronger signals.
Check the connection of the car antenna.
Change broadcast fr om stereo to mono.
Preset stations lost.
Battery cable i s not connected corre ctly.
Connect the batter y cable to the termin al
that is always live.
Display show ERR-12
USB data error. Check the USB device.
Display show ERR-3
USB/SD data error.
EN