PSB42YGX
GE Profile™ 42"
Dimensions and Installation Information Product Clearances
These refrigerators are equipped with a 2 position door stop. The factory set 130° door swing can be adjusted to 90° if clearance to adjacent cabinets or walls is restricted.
25-3/8" Case Depth
Stainless Steel Wrapped Refrigerators | 41" | |
Case Width | ||
Stainless Steel wrapped refrigerators have wrapped | ||
| ||
doors and grille panels, and beveled edges. These |
| |
models are shipped ready for installation. |
|
130° Door Swing
A B
D
90° Door Swing
C
D
| *84" From |
at Rear | Floor to |
| Top Frame |
Models | A | B | C | D |
42" | 16" | 24" | 4" |
Allow minimum clearances for Freezer door (Dimension
A)and Fresh Food door (Dimension B) for a full 130° door swing and to allow for drawer removal.
Four inch (4") minimum clearance is required when door swing is adjusted to 90°. If the 90° door stop position is used, drawer access is maintained, but drawer removal is restricted.
For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.
42" Frame-to-Frame
Depth Including
Handles 27"
*Shipping height
*The front height may be adjusted from
Total volume and shelf | Listed by | |
area are calculated by | ||
Underwriters | ||
the Association of Home | ||
Laboratories | ||
Appliance Manufacturers’ | ||
| ||
standards. |
|
Specification Created 1/08 | 210377 |