GE PSCS5RGXSS, PSCS3RGXSS dimensions Specification Revised 7/10

PSCS5RGX

GE Profile™ Counter-Depth 24.6 Cu. Ft. Side-By-Side Refrigerator

Rough-In Dimensions and Installation Information (in inches) Installation Tips to Maximize the Built-In Look

•All wall/floor molding should be removed prior to installation.

•Water recess on rear wall recommended to prevent water line damage. 48" minimum length, 1/4" diameter water line tubing recommended.

•When possible, recess both copper water line and electrical outlet. (See local codes)

•Front and rear leveling legs are adjustable for the built-in look.

(See owner’s manual)

*The rough-in dimensions of 70" for 23 cu. ft. models and 72- 1/2" for 25 cu. ft. models are minimum and measured from the finished floor to top of opening (or the underside of the overhead cabinets). For Models with Trim Kit: If frameless style cabinets are planned for above the refrigerator, you may need to consider adding a maximum of 1/4" (70-1/4") to height of opening for 23 cu. ft. models and 1/8" (72-5/8") for 25 cu. ft. models to allow for additional clearance between the cabinet doors and the top of refrigerator trim when the cabinet doors are in open position.

†Model PSDW3YGX is 71-3/4"

24" Cabinet

Water Electrical

3/4" Airspace

(1/2" Gap + 1/4"

Wall Plates)

25"

Counter

Top

12" Soffit

8' Ceiling

13" to 14" Cabinet

70"*†

23 cu. ft. models

72-1/2"*

25 cu. ft. models

24-1/2"

36-1/8"

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

Listed by

Underwriters

Laboratories

Specification Revised 7/10 210296