PSH23PGS
GE Profile CustomStyle™ ENERGY STAR® 22.6 Cu. Ft.
Door Panel Dimensions and Installation Information (in inches)
Order your own custom wood panels to match cabinetry or other decor.
Freezer Panel Without Dispenser
Freezer Panel With Dispenser
Fresh Food | Installation of Water Outlets | |
Panel |
|
|
Panels up to 1/4" thick will fit door frame with no special preparation. Add filler behind material thinner than 1/4" for proper fit.
Weight Limits: Total weight of panels (i.e., both freezer
NOTE: Panels up to 3/4” will require special routing area
Cut
out 1/8
5/16
Cut
out 1/8
5/16
1/8
Cut out
5/16
1/2"
Alternate water
line location through floor
around handles. Dimensions may vary depending on depth of panel.
IMPORTANT: Before finalizing specifications for your GE Profile CustomStyle Refrigerator, please NOTE:
•A minimum of
•Be sure to allow for 1/2" or 3/4" side panels in addition to the
FRONT
FRONT
FRONT
Top View
Recommended single loop of 1/4" copper water line
Allow 48" minimum water
line to enable refrigerator 24" to be pulled forward
Water
Detail C
1/8" |
5/16" |
Panels 1/4" thick
or less
1/4" Max.
18"
Recommended water line location using recess
in rear wall
Rear Wall View
For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.
(Fresh Food panel shown) Notch required at top corner as noted.
Listed by Underwriters Laboratories
As an Energy Star® partner, GE has determined that this product meets the Energy Star guidelines for energy efficiency.
Specification Revised 3/06 | 210281 |