GE PSH25PGW, Specification Revised 7/07, Ceiling 70-1/4 23 cu. ft. models 72-1/4, 210219

PSH25PGW

GE Profile™ Counter-Depth ENERGY STAR® 24.6 Cu. Ft. Side-By-Side Refrigerator

Rough-In Dimensions and Installation Information (in inches) Installation Tips to Maximize the Built-In Look

•All wall/floor molding should be removed prior to installation.

•Water recess on rear wall recommended to prevent water  line damage. 48" minimum length, 1/4" diameter water  line tubing recommended.

•When possible, recess both copper water line and electrical  outlet. (See local codes)

•Front and rear leveling legs are adjustable for the built-in look.  (See owner’s manual)

**The rough-in dimensions of 70-1/4"/72-1/4" are minimum and measured from the finished floor to top of opening (or the underside of the overhead cabinets). For Models with Trim Kit:

If frameless style cabinets are planned for above the refrigerator, you may need to consider adding a maximum of 1/4" (70-1/2")  to height of opening for 23 cu. ft. models and 1/8" (72-3/8") for  25 cu. ft. models to allow for additional clearance between the cabinet doors and the top of refrigerator trim when the cabinet doors are in open position.

24" Cabinet

Water	Electrical
	12"
	Soffit

3/4" Airspace

(1/2" Gap + 1/4"

Wall Plates)

25"

Counter

Top

8' Ceiling

70-1/4"*

23 cu. ft. models

72-1/4"*

25 cu. ft. models

24-1/2"

36-1/8"

13" to 14" Cabinet

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service,  800.626.2000.

Listed by Underwriters Laboratories

As an Energy Star® partner, GE has determined that this product meets the Energy Star guidelines for energy efficiency.

Specification Revised 7/07 210219