GE PT7050 Special Features, Using The Oven, Fahrenheit or Celsius Temperature Display, Default

Models: PT7050

1 24
Download 24 pages 38.82 Kb
Page 10
Image 10
Special Features

Special Features

Special Features

There are numerous special features that are controlled using the number key pad.

Degree - Fahrenheit or Celsius temperature display

• 12hr shutoff - 12 Hour Shutoff

• End tone - Cycle End Tone

• Sabbath - Sabbath mode

• Sound - Tone Volume

• Temp Offset - Adjust the oven temperature

• Setting - Clock Setting

(Double ovens have upper and lower options)

• Notification Light Bar - Turns the light indicator on or off

• Auto Recipe - Auto Recipe Conversion

• Default - Reset control to factory settings

(for Convection Baking)

USING THE OVEN:

To change the Special Features settings follows these guidelines.

Press and hold the Traditional Bake and Traditional Broil pads for 3 seconds simultaneously.

When you enter the special features mode:

The numbers 2 and 8 act as up and down to scroll thru the features and their settings.

The numbers 4 and 6 act as right and left to change back and forth from scrolling thru the features to changing the feature settings.

1

2

3

=

1

 

3

4

5

6

 

Enter

 

7

8

9

 

7

 

9

Cook

0

Set

 

Cook

0

Set

Clock

 

Clock

Time

 

Time

 

AM/PM

 

 

AM/PM

The number 5 acts as an enter pad.

Press and hold the Traditional Bake and Traditional Broil pads for 3 seconds simultaneously to exit the special feature mode.

Example: Adjusting the Oven Temperature

 

 

1.

Press and hold the Traditional Bake and Traditional

4.

Press the number 2 or 8 pads to either increase or

 

Broil pads for 3 seconds simultaneously to enter

 

decrease the temperature in one degree Fahrenheit

 

special features mode.

 

increments up to + 35º F or down to -35º F.

2.

Press the number 2 pad until the display reads “Temp

5.

Press the number 5 pad to save your desired change.

 

Offset” (double wall ovens will have a selection for

6.

Press the number 4 pad to return to the other features.

 

both the upper and lower ovens).

 

7.

Press and hold the Traditional Bake and Traditional

3.

Press the number 6 pad to change the special feature

 

Broil pads for 3 seconds simultaneously to exit the

setting.

special feature mode.

 

Fahrenheit or Celsius Temperature Display

Your oven control is set to use Fahrenheit temperature units but can be changed to use Celsius temperature units if preferred.

Cycle End Tone

This is the tone that signals the end of a timer. You can change it to be one tone (bEEP) or a continuous repeating tone (con).

Tone Volume

This feature allows the oven tone volume to be adjusted between high, medium (default), low, and off.

Clock Setting

This feature specifies how the time of day will be displayed. Options are for a standard 12-hour clock with AM and PM selections, 24-hour military time display, or for no display.

Auto Recipe Conversion

When using Convection Bake or Convection Bake Multi cooking modes, Auto Recipe conversion will automatically reduce the programmed cooking temperature. Note that this option does not convert convection baking times, only temperatures.

12-hour Shutoff

When this feature is turned on, the oven will automatically turn off after 12 continuous hours of use.

Default

This feature resets all of the special features to the default settings originally on the oven.

10

49-80668-2

Page 10
Image 10
GE PT7050 Special Features, Using The Oven, Fahrenheit or Celsius Temperature Display, Cycle End Tone, Tone Volume, Enter