PT920BM/WM
GE Profile™ 30" Built-In Single Convection Wall Oven
Dimensions and Installation Information (in inches)
KW Rating
240V | 4.5 |
|
|
208V | 3.4 |
|
|
Breaker Size | |
|
|
240V | 20 Amps |
|
|
208V | 20 Amps |
|
|
Most 30” Wall Cabinets can be used with this unit.
Note: These ovens are not approved for stackable installations. Cabinets installed adjacent to wall ovens must have an adhesion spec of at least a 194°F temperature rating.
Door handle protrudes 3" from door face. Cabinets and drawers on adjacent 45° and 90° walls should be placed to avoid interference with the handle.
Suitable bracing to support runners
C |
L |
over centerline of cabinet
(must support 275 lbs.)
Cutout width
2 x 4 or equivalent runners
A
Conduit
C(72" long)
5
B
Recommended cutout location
Junction box location
22'' MIN.
Electric wall ovens are not approved for installation with a plug and receptacle. They must be hard wired in accordance with installation instructions.
Installation Information: Before installing, consult installation instructions packed with product for current dimensional data.
For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.
21 |
|
Allow minimum of 21'' for clearance | 30 |
to adjacent corners, drawers, walls, or etc. |
|
from floor
Listed by Underwriters Laboratories
Specification Created 1/07
220237