GE PT970SM installation instructions

PT970SM

GE Profile™ 30" Built-In Double Microwave/Convection Oven

Dimensions and Installation Information (in inches)

KW Rating

240V	6.4
208V	5.6
Breaker Size
240V	30 Amps
208V	30 Amps

Note: Cabinets installed adjacent to wall ovens must have an adhesion spec of at least a 194°F temperature rating. Electric wall ovens are not approved for installation with a plug and

Suitable bracing to support runners

C

L

21-5/8"

over centerline of cabinet

(must support 275 lbs.)

2 x 4 or equivalent runners

F A

CABINET

WIDTH

30''

CUTOUT

WIDTH

28-1/2'' MIN.

28-5/8'' MAX.

C

CONDUIT

(72'' LONG)

20''

CUTOUT DEPTH

23-1/2'' MIN.

JUNCTION BOX

LOCATION

A

CUTOUT

HEIGHT

42-3/16'' MIN.

receptacle. They must be hard wired in accordance with installation instructions.

Door handle protrudes 3" from door face. Cabinets and drawers on adjacent 45° and 90° walls should be placed to avoid interference with the handle.

Installation Information: Before installing, consult installation instructions packed with product for ­current dimensional data.

Cabinet	30"
A – Overlap of oven over side of edges of cutout	11/16"
B – Overlap of oven at top and bottom of cutout	1"
C – Overall of oven at top of cutout	1/2"
Oven
D – Overall depth*	23-1/2"
E – Overall height with trim	44"
Overall height without trim	43-1/2"
E –Overall width	29-3/4"

*Depth including door handle is approximately 26-6/10" min. to 26-9/10" max.

21" Minimum

Door Allowance DOOR MUST BE

REMOVED BEFORE

INSTALLATION

E

B

D

42-1/4'' MAX. 28''

Minimum cutout location 21-5/8''

from the floor

21''

MOST 30'' WALL CABINETS CAN BE USED WITH THIS UNIT.

THE OPENING BETWEEN THE INSIDE WALLS MUST BE AT LEAST 28-1/2'' WIDE.

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

Listed by

Underwriters

Laboratories

Specification Revised 9/07

220145