Consumer Support Troubleshooting Tips Care and Cleaning Operating Instructions Safety Instructions

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

SAFETY PRECAUTIONS

WARNING –TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:

A.Use this unit only in the manner intended by the manufacturer. If you have questions, contact the manufacturer.

B.Before servicing or cleaning unit, switch power off at service panel and lock the service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.

C.Do not use this unit with any solid-state speed control device.

D.This unit must be grounded.

CAUTION– For general ventilating use only. Do not use to exhaust hazardous or explosive materials and vapors.

CAUTION– To reduce risk of ￿re and to properly exhaust air, be sure to duct air outside. Do not vent exhaust air into spaces within walls or ceilings or into attics, crawl spaces, or garages.

WARNING– To reduce the risk of ￿re or electric shock, DO NOT use this fan with any solid-state speed control device.

WARNING –TO REDUCE THE RISK OF INJURY TO PERSONS IN THE EVENT OF A RANGE TOP GREASE FIRE, OBSERVE THE FOLLOWING*:

A. SMOTHER FLAMES with a close-fitting lid, cookie sheet, or metal tray, then turn off the burner. BE CAREFUL TO PREVENT BURNS. If the flames do not go out immediately, EVACUATE AND CALL THE FIRE DEPARTMENT.

B. NEVER PICK UP A FLAMING PAN — You may be burned.

C. DO NOT USE WATER, including wet dishcloths or towels—a violent steam explosion will result.

D. Use an extinguisher ONLY if:

1.You know you have a Class ABC extinguisher, and you already know how to operate it.

2.The fire is small and contained in the area where it started.

3.The fire department is being called.

4.You can fight the fire with your back to an exit.

*Based on “Kitchen Fire Safety Tip”s published by NFPA.

2

Page 1 Page 3
Page 2
Image 2
GE PVWG936, PVWT936, PVWS930, PVIG940, PVWS936 manual Important Safety Information
Page 1 Page 3

PVWS936, PVIG940, PVWG936, PVWS930, PVWT936 specifications

The GE PVWS936, PVWT936, PVWS930, PVWG936, and PVIG940 are part of General Electric's advanced lineup of water and wastewater management solutions. These models reflect GE's commitment to delivering innovative technology, energy efficiency, and operational reliability in the realm of water treatment.

One of the standout features of the GE PVWS936 and PVWT936 is their robust filtration capabilities, designed to handle a variety of water quality issues. These models incorporate advanced membrane technology which enhances the efficiency of contaminant removal while minimizing energy consumption. This leads to significant cost savings in chemical usage and maintenance, a valuable proposition for municipalities and industrial applications alike.

The PVWS930 model emphasizes versatility and ease of operation. It is equipped with user-friendly interfaces and remote monitoring capabilities, allowing operators to track performance metrics in real-time. This feature not only streamlines operations but also aids in proactive maintenance, reducing downtime and extending the life of the equipment.

Another notable characteristic is observed in the PVWG936, which boasts a compact design without compromising on performance. It is engineered to maximize space utilization in treatment facilities, making it ideal for sites where footprint is a concern. This model is particularly well-suited for urban settings where space limitations are increasingly becoming an operational hurdle.

The GE PVIG940 focuses on integrated growth with an emphasis on sustainability. This model goes beyond just treating water; it's designed to promote environmental stewardship by incorporating energy-efficient components and reducing carbon footprint. Its ability to integrate with renewable energy sources underscores GE's commitment to sustainable development in water management.

All these models share common technological advancements such as enhanced automation, data analytics, and IoT integration. The data analytics capabilities allow operators to make informed decisions based on real-time data, leading to improved operational efficiencies. Furthermore, the IoT integration enables predictive maintenance, ensuring that systems are functioning optimally and reducing the likelihood of unexpected failures.

Overall, the GE PVWS936, PVWT936, PVWS930, PVWG936, and PVIG940 are engineered to meet the demands of modern water treatment processes. Their advanced features, emphasis on energy efficiency, and commitment to sustainability make them exceptional choices for both municipal and industrial applications. As water scarcity and quality issues continue to challenge communities worldwide, these models present effective solutions that align with the best practices in environmental management.
Top Page Image Contents