GE R20 user manual Troubleshooting, 120VAC 75W MAX

Troubleshooting

-Ensure power to the Recessed Light Extender is turned “ON”.

-Test your bulb in another fixture to ensure that the bulb is good.

-Recessed Light Extender’s safety ratchet will begin to slip when the screw-in torque becomes too high. In this case the safety ratchet may begin to slip before the Recessed Light Extender is fully seated into the light socket, causing the Recessed Light Extender to not operate. These situations usually develop due to a corroded or misthreaded recessed light lamp socket. Please consult a qualified electrician if repair is required for a recessed light socket.

!WARNING

RISK OF FIRE OR ELECTRIC SHOCK:

•Turn OFF power before installation, removal or re-lamping

•Do not exceed electrical ratings

•For indoor use only

•Install this kit only in the luminaires that has the construction features and dimensions shown in the photographs and/or drawings

•Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation.

•Do not alter, relocate, or remove wiring, lampholders, ballast, or any other electrical component

Made in China / Hecho en China

is a trademark of General Electric Company and is used under license to Jasco Products Company LLC, 10 E. Memorial Road, Oklahoma City, OK 73114

This Jasco product comes with a 1 year limited warranty. Visit www.jascoproducts.com for details.

Este producto de Jasco Products tiene una garantía limitada de 1 año. Visite www.jascoproducts.com para detalles.

120VAC 75W MAX

45153-2 3/26/10