FRESH SELECT ZONETM DRAWER GUIDE

Fresh Function

•By pressing the “Fresh Select Zone” button, you can select proper temperature function for your foods.

•It changes in sequence Soft Freeze, Chill, Cool and Fresh.

Soft Freeze

•You can use “Soft Freeze” function to help keeping meat and fish fresh for longer than the Fridge.

•When "Soft Freeze" mode is selected, the compartment temperature will be approximately - 5°C(depending on the ambient temperature & amount stored).

-Meat can be stored safely for a longer period of time in this mode than in the other modes and has the advantage that the meat will remain soft enough to be easily sliced.

-Do not put bottles and glass containers or foods that have a high water content as these are liable to burst due to the low temperature"

Chill

•You can use “Chill” function to help keep fresh at about -1°C.

•At -1°C, near the water Freezing temperature, foods can be stored safely for longer than the refrigerating tempera- ture.

-Do not put bottles and glass containers or foods that have a high water content in the drawer, because the “Chill” temperature is below 0°C.

Cool

•“Cool” function keeps the fridge setting temperature.

For example, if the Fridge is set to 3°C, the Fresh Select Zone will be the same.

•Also in this function the humidity of this compartment is high by TDM system.

-If you put foods that contain a lot of water without lids or wrapping paper, water droplets may form on the side wall, because of high humidity.

Fresh

•You can use “Fresh” function to help keep vegetables and fruits fresher.

•“Fresh” temperature is about 4°C. The humidity is kept high to store veggies and fruits by the TDM system.

Upper Drawer

•The humidity in the drawer is high when fresh food is stored in “Cool” or “Fresh” mode.

Drawer

•You can also store bottles in “Fresh” mode.

The humidity in the drawer is kept high in “Cool” and “Fresh” mode.

12

Page 11 Page 13
Page 12
Image 12
GE RM25 owner manual Fresh Select Zonetm Drawer Guide, Fresh Function
Page 11 Page 13

RM25 specifications

The GE RM25 is a powerful and versatile gas turbine engine specifically designed for a variety of applications, including aviation and industrial settings. With its innovative technologies and impressive performance characteristics, the RM25 has established itself as a reliable choice for clients looking for efficiency and durability.

One of the standout features of the GE RM25 is its high thrust-to-weight ratio, which allows the engine to produce significant power while maintaining a relatively low mass. This attribute is particularly beneficial for aircraft, where weight reduction is crucial for enhancing flight performance and fuel efficiency. The engine’s design incorporates advanced materials that contribute to its light weight without compromising strength or reliability.

The RM25 employs a sophisticated modular design, making it easier to maintain and service compared to conventional gas turbines. This modularity ensures that individual components can be easily replaced or repaired, reducing downtime and optimizing operational efficiency. The engine’s service intervals have been extended, allowing for longer operational periods between maintenance checks.

GE's commitment to innovation is evident in the use of cutting-edge technologies within the RM25. The engine features a state-of-the-art digital control system that enhances its performance, providing real-time monitoring and adjustments to optimize fuel consumption and emissions. This technology helps in achieving better environmental compliance, a crucial aspect in today’s aviation and industrial landscapes.

Another key characteristic of the RM25 is its adaptability. The engine can be configured for various operating conditions, making it suitable for a wide range of missions and usages. This versatility is complemented by the engine’s ability to operate efficiently across different altitudes and temperatures, making it a reliable choice for clients in diverse environments.

Finally, the GE RM25 is recognized for its robust safety features, designed to ensure the utmost reliability in high-stakes operations. The engine undergoes rigorous testing and quality assurance processes to maintain the highest standards of performance and safety.

In conclusion, the GE RM25 gas turbine engine represents a remarkable fusion of power, efficiency, and innovation. Its combination of advanced technologies, modular components, and adaptability make it an attractive option for various applications, solidifying its reputation in the industry as a leading choice for reliable performance.
Top Page Image Contents