INSTALLATION OF THE WATER DISPENSER LINE

3)Important Facts About Your Dispenser :

Do not add ice from trays or bags to the storage bin. It may not crush or dispense well.

Avoid overfilling glass with ice and use of narrow or extra-tall glasses. Backed-up ice can jam the chute or cause the door in the chute to freeze shut. If ice is blocking the chute, poke it through with a wooden spoon.

Beverages and foods should not be quick-chilled in the ice storage bin.

To keep dispensed ice from missing the glass, put the glass close to, but not touching, the dis- penser opening.

Some crushed ice may be dispensed even though you selected CUBES. This happens occasionally when a few cubes accidentally get directed to the crusher.

After crushed ice is dispensed, some water may drip from the chute.

4)Water Supply to the Icemaker :

The icemaker must be connected to a cold water line.

5)Start the Icemaker :

Set the type of ice to the "Cubed Ice" or "Crushed Ice" position. The icemaker will not begin to oper- ate until it reachs its operating of -12°C or below. It will then begin operation automatically if the type of ice is in the "Cubed Ice" or "Crushed Ice" position.

• If there is no water supply, turn off the icemaker to save energy.

NOTE • In lower water pressure conditions, the water valve may turn on up to 3 times to make sure enough water reaches the icemaker.

• Allow the appliance to stand for 2hours after installation.

WARNING

Use only the ice maker provided with the refrigerator.

INSTALLATION INSTRUCTIONS

37

Page 36 Page 38
Page 37
Image 37
GE RM25 owner manual Important Facts About Your Dispenser, Water Supply to the Icemaker, Start the Icemaker
Page 36 Page 38

RM25 specifications

The GE RM25 is a powerful and versatile gas turbine engine specifically designed for a variety of applications, including aviation and industrial settings. With its innovative technologies and impressive performance characteristics, the RM25 has established itself as a reliable choice for clients looking for efficiency and durability.

One of the standout features of the GE RM25 is its high thrust-to-weight ratio, which allows the engine to produce significant power while maintaining a relatively low mass. This attribute is particularly beneficial for aircraft, where weight reduction is crucial for enhancing flight performance and fuel efficiency. The engine’s design incorporates advanced materials that contribute to its light weight without compromising strength or reliability.

The RM25 employs a sophisticated modular design, making it easier to maintain and service compared to conventional gas turbines. This modularity ensures that individual components can be easily replaced or repaired, reducing downtime and optimizing operational efficiency. The engine’s service intervals have been extended, allowing for longer operational periods between maintenance checks.

GE's commitment to innovation is evident in the use of cutting-edge technologies within the RM25. The engine features a state-of-the-art digital control system that enhances its performance, providing real-time monitoring and adjustments to optimize fuel consumption and emissions. This technology helps in achieving better environmental compliance, a crucial aspect in today’s aviation and industrial landscapes.

Another key characteristic of the RM25 is its adaptability. The engine can be configured for various operating conditions, making it suitable for a wide range of missions and usages. This versatility is complemented by the engine’s ability to operate efficiently across different altitudes and temperatures, making it a reliable choice for clients in diverse environments.

Finally, the GE RM25 is recognized for its robust safety features, designed to ensure the utmost reliability in high-stakes operations. The engine undergoes rigorous testing and quality assurance processes to maintain the highest standards of performance and safety.

In conclusion, the GE RM25 gas turbine engine represents a remarkable fusion of power, efficiency, and innovation. Its combination of advanced technologies, modular components, and adaptability make it an attractive option for various applications, solidifying its reputation in the industry as a leading choice for reliable performance.
Top Page Image Contents